View original (French)

Error 0xc18a0106 HP Photosmart printer

pierro68 Posted messages 5 Status Member -  
 mvs -
Hello
I can no longer print on my HP Photosmart 3310 all-in-one.
Does anyone know what to do when you get the message "0xc18a0106" on your HP printer? Thank you all

8 answers

  1. Absky
     
    Hello!

    I had the same error and I followed this procedure that worked

    "Turn on the printer.
    Once it's ready, hold down the "9" and "#" buttons
    Unplug the power cable while continuing to hold down
    wait about thirty seconds
    plug the power back in without releasing the buttons
    the HP logo appears on the screen
    wait for the screen to go off
    Finally, you can release the two buttons
    Then turn on the printer using the power button
    Enter the language and other settings again
    then wait for the printer to do the maintenance for about 5 minutes
    That's it, the printer is working again"

    If this procedure works for you, please let me know
    Thank you clubic.com

    P.S. It is preferable to plug the printer directly into the wall without using an extension cord
    20
    1. Mamadoo
       
      It's not working for me either, well, given the age of the printer...

      Thanks anyway for the advice.
      0
    2. robert38
       
      Hello Absky (or someone else)
      I also have the error 0xc18a0106 on my HP 3210 printer which is 4 years old.
      I would have tried your manipulation... but there's no # key on the printer...
      Do you have an idea for an equivalent reset?
      Thank you for your (your) response.
      0
    3. Manouche2011 Posted messages 1 Status Member
       
      Thank you so much, Absky! It works perfectly for my HP Photosmart C7280 All-in-One!!! I thought I would have to buy a new All-in-One and “scrap” my full ink cartridges from the one I currently have. It was really... how should I put it? ANNOYING!!!
      Especially since the colors are very nice on the documents I print.
      So once again, a BIG THANK YOU!
      0
    4. shadow
       
      Thank you very much for this tip, I was struggling too much to print my resignation letter that I need to send today, you've "saved my life" :)
      0
    5. did
       
      Thank you very much for this great tip, after 8 hours of various attempts PHEW!!!
      For the Photosmart C5180, the two buttons to press are "OK" and "Help".
      3
  2. Jann31 Posted messages 717 Registration date   Status Member Last intervention   446
     
    Good evening,

    The solutions regarding this error:
    http://imprimante-en-question.blogspot.com/2011/02/erreur-0xc18a0106-sur-les-imprimantes.html

    Good luck,
    2
  3. El CHE
     
    Sans éteindre le produit, débranchez le câble USB à l'arrière du produit.

    Retirez les cartouches du produit.

    Attendez que le message 'Insérer les cartouches' s'affiche sur le panneau de contrôle.

    Débranchez le cordon d'alimentation à l'arrière du produit.

    Attendez 60 secondes.

    Reconnectez le cordon d'alimentation. Si le produit ne s'allume pas automatiquement, appuyez sur le bouton d'alimentation ( ).

    Réinsérez les cartouches, puis fermez toutes les portes ouvertes du produit.

    Si vous recevez une invitation à imprimer une page de calibration, faites-le.

    Reconnectez le câble USB à l'arrière du produit, puis essayez d'imprimer à nouveau.
    0
    1. absky
       
      Do you work at HP?
      Because this type of solution 100% does not work
      it's HP's general solution
      I'm telling you it doesn't work.
      0
  4. pierro68 Posted messages 5 Status Member
     
    Thank you for your help, I followed everything to the letter but still the same message at the end... grrrrrrrr.
    0
  6. absky
     
    Robert unfortunately I don't know
    sorry
    0
  7. mamy974
     
    Thank you Absky, it worked for my HP Photosmart C7280 all-in-one.
    0
  9. polochon
     
    It also worked perfectly for my HP Photosmart
    C7180. THANK YOU.
    0