Unable to change channel in DTV mode

Unplug and plug the TV back in, then rescan for channels in DTT. I had a crash on an LG after changing my amplifier, no more channels, and no more control options.

I found an answer to my problem on the forum, I'm passing it on to you just in case. It worked for me.

You need to access a hidden menu on the TV... here's how to do it:
WARNING in case of issues... the warranty won't cover it....

You need to put the screen in standby and then press INFO, then MENU, then MUTE, then POWER. The screen will then light up with a menu where line 12 says "reset".
Then scroll down to that line and confirm with the "right arrow" key.
After 3 seconds the TV will turn on again (or turn it on manually) with the plug and play starting followed by a search for TNT channels... Let the search finish and there; oh miracle, it works.

Indeed, it's not something you can just make up!!! Why keep it simple when you can make it complicated, right?! ,)

Thanks for the information, it could be useful!

Best regards,

See you later


--
"Who wants to climb a mountain starts from the bottom!"

You're too good!!! Thanks, it works so well! Absolutely forward this.