View original (French)

Kodak z710 issue + 8 GB SDHC card

Julo_du_59 Posted messages 91 Status Member -  
gouby Posted messages 386 Registration date   Status Contributor Last intervention   -
Hello,

I recently bought the Kodak EasyShare Z710, and since the internal memory of the device is 32 MB, I purchased an 8GB Toshiba Micro SDHC card.

While taking photos, I was surprised to see a message saying "Internal memory full." Normally, the card should have taken over...

I switched the memory to 'Automatic,' and it now tells me "The memory card is unusable (insert a new memory card)."

Now I'm starting to worry...

Is the Kodak Z-710 compatible with my card? Does the device have a problem? Or do I simply need to format the memory card?

I need help quickly
Thanks in advance

5 answers

  1.
    gouby Posted messages 386 Registration date   Status Contributor Last intervention   6 491
     
    Hello

    check if she accepts the 8 gigabytes, it might be too much for the device
    --
    O.o°• ♪♪♫ SHEBAM ! POW ! BLOP ! WIZZ ! ♫♪♪ •°o.O 
    °º¤ø,¸¸,ø¤º°`°º¤ø,¸It will go well.............or not !¸,°º¤ø,¸¸,ø¤º°`°º¤ø,¸
    0
  2. Julo_du_59 Posted messages 91 Status Member 2
     
    How can I know?

    By opening the side, it says SD/MMC, but my card is an SDHC, could that be it?
    0
  3. gouby Posted messages 386 Registration date   Status Contributor Last intervention   6 491
     
    I had the same issue with a mobile phone, and it was due to the fact that it did not accept SD High Capacity

    In my opinion, it's the same for the camera, check the manual if you have it, but in my opinion, it's due to that

    Most accept up to 4 gigabytes in standard SD
    --
    O.o°• ♪♪♫ SHEBAM ! POW ! BLOP ! WIZZ ! ♫♪♪ •°o.O 
    °º¤ø,¸¸,ø¤º°`°º¤ø,¸Everything is going to be fine.............or not !¸,°º¤ø,¸¸,ø¤º°`°º¤ø,¸
    0
  4. Julo_du_59 Posted messages 91 Status Member 2
     
    What do you think I should do?

    Format the 8GB SDHC?

    Unfortunately, the manual doesn’t say much.

    In the end, I'm going to test with a 2GB SD. If it works, then the device doesn't accept SDHC, and I've seen that SD cards are compatible with MMC, so I think that's it.

    Or maybe it's just too high a capacity (8GB).
    0
  6. gouby Posted messages 386 Registration date   Status Contributor Last intervention   6 491
     
    I think it's the format of the card that is not supported, the best option is to take a 2 or 4GB SD card, no more
    --
    O.o°• ♪♪♫ SHEBAM ! POW ! BLOP ! WIZZ ! ♫♪♪ •°o.O 
    °º¤ø,¸¸,ø¤º°`°º¤ø,¸Everything will be fine.............or not!¸,°º¤ø,¸¸,ø¤º°`°º¤ø,¸
    0