View original (French)

LIVE BOX optical fiber port config

Solved
cousinzinc Posted messages 5 Status Member -  
 A -
Hello, I just installed the brand new live box which is smaller than the old one, the admin space has also changed, I would like to know if anyone knows how to add a TCP port, I know I need to go to advanced settings => NAT/PAT => add application rule => new entry and after that I don't know what to put in local host, I'm a bit stuck at this point.

Thanks in advance
Configuration: Windows XP live box + fiber optic Firefox 3.0.11

10 answers

  1. Fabio06
     
    If it's for eMule, it's fine. You go to "preferences," "connection," then check the box "configure ports using UPnP" and you will be in High ID (after restarting the software, of course).
    3
  2. fly320
     
    Hello,

    I also wanted to switch to high ID on E-mule when I received my new livebox.
    So I clicked on the "configure ports using UPnP" box in emule, but I'm far from having a high ID!
    I checked that the UPnP IGD server is enabled in the livebox, and it is.

    Do you have any idea what needs to be done? I haven't done any manipulations like cousinzinc initially wanted to do.

    Thank you!
    1
    1. Xoo
       
      Same problem as fly320. Help please!
      0
  3. Smart91 Posted messages 30146 Status Security Contributor 2 331
     
    The discussion is resolved. Please raise your issue in a new thread on the forum.

    Smart
    --
    "If you have no ambitions, you settle on the edge of the fall" (Kundera)
    1
  4. batou8 Posted messages 329 Status Member 63
     
    Hello!! I think that in localhost you need to put your IP address, so that the ports are redirected to your machine.
    0
  6. cousinzinc Posted messages 5 Status Member
     
    Yes, I did that but it still doesn't work!
    0
    1. Smart91 Posted messages 30146 Status Security Contributor 2 331
       
      It is also possible that it is your host's firewall (the PC to which you are redirecting the ports) that is blocking. Also, open the ports in the firewall

      Smart
      --
      "If you have no ambitions, you settle on the edge of the fall" (Kundera)
      0
  7. Fabio06
     
    I also received my new Livebox today, and I’m stuck at the same place as cousinzinc
    If anyone has an idea ^^
    0
  8. Fabio06
     
    It's good, I found it, and the same method is extremely simple. (Well, I don't know if that will suit you)
    If there's a way in your software to enable UPnP, then your problem will be solved.
    If that's not possible in your case, can you specify which software (or other) you want to add a TCP port to??
    0
  9. cousinzinc Posted messages 5 Status Member
     
    lol it's for emule, I just need to open a TCP port!
    0
  10. cousinzinc
     
    Thank you very much, it's all good. I complicated things for myself by wanting to open a TCP port, but I'm good in high now, thanks to you!
    0