Pb config serveur impression Trendnet TEW-P1U
phiphi61
Messages postés
3
Date d'inscription
Statut
Membre
Dernière intervention
-
jeremy -
jeremy -
Bonjour,
Je viens d'acheter le serveur d'impression sans fil Trendnet TEW-P1U et je n'arrive pas à le configurer sur mon réseau déja existant.
Voici mon matériel:
Modem routeur ADSL Linksys WAG54G-FR
1 PC avec windows XP connecté au routeur par cable ethernet
1 PC portable avec carte wifi linksys
1 imprimante Epson stylus photo R300
le serveur d'impression wifi TEW-P1U.
Quand je met le cd d'installation et que je suis la notice, le logiciel ne détecte pas mon "Print server"
Merci pour votre aide
Je viens d'acheter le serveur d'impression sans fil Trendnet TEW-P1U et je n'arrive pas à le configurer sur mon réseau déja existant.
Voici mon matériel:
Modem routeur ADSL Linksys WAG54G-FR
1 PC avec windows XP connecté au routeur par cable ethernet
1 PC portable avec carte wifi linksys
1 imprimante Epson stylus photo R300
le serveur d'impression wifi TEW-P1U.
Quand je met le cd d'installation et que je suis la notice, le logiciel ne détecte pas mon "Print server"
Merci pour votre aide
A voir également:
- Pb config serveur impression Trendnet TEW-P1U
- Spouleur d'impression - Guide
- Impression livret a5 - Guide
- Ms config - Guide
- Changer serveur dns - Guide
- Connaitre sa config pc - Guide
6 réponses
Bonjour j'ai achete un Trendnet pour partager mon imprimante avec un portable ,
arrivé a la 11 phase de l'instalation on me demande de selectionner le serveur d'impression mais je n'ai rien d'inscris dans la fenetre quelqu'un peut il m'aider merci d'avance
arrivé a la 11 phase de l'instalation on me demande de selectionner le serveur d'impression mais je n'ai rien d'inscris dans la fenetre quelqu'un peut il m'aider merci d'avance
Bonjour,
J'ai exactement le même problème que toi, as tu trouvé une solution depuis ?
Merci pour ton aide,
J'ai exactement le même problème que toi, as tu trouvé une solution depuis ?
Merci pour ton aide,
Hello,
J'ai aussi acheté un TEW-P1U, il y a qq semaines...
J'ai réussi à l'installer sans trop de problèmes.
Et j'ai parfois réussi à imprimer une ou deux feuilles...
Toutefois, je n'ai jamais réussi à imprimer de manière certaine.
Ce serveur d'impression provoque des erreurs PCL6 à longueur de temps sur mon imprimante :-((
Sans vouloir vous déprimer... La partie wireless marche nickel mais pas l'impression.
Dom.
J'ai aussi acheté un TEW-P1U, il y a qq semaines...
J'ai réussi à l'installer sans trop de problèmes.
Et j'ai parfois réussi à imprimer une ou deux feuilles...
Toutefois, je n'ai jamais réussi à imprimer de manière certaine.
Ce serveur d'impression provoque des erreurs PCL6 à longueur de temps sur mon imprimante :-((
Sans vouloir vous déprimer... La partie wireless marche nickel mais pas l'impression.
Dom.
Hello,
Pour l'accès HTTP, pas de pb, tu browses directement l'adresse IP du serveur d'impression. Toutefois, la page n'offre pas de nouvelles fonctionnalités.
Ci-dessous la réponse du support Trendnet concernant mes pb d'impression... A priori, ce gars pense que je ne sais pas déclarer une imprimante...
Dom.
Dear Customer,
Please follow these steps for adding a printer.
Setting up Windows 2000/XP TCP/IP Printing
Following is the correct procedure for setting up TCP/IP LPR printing under Windows 2000 / XP.
-Click Start > Settings > Printers.
-Double Click “Add Printer”
-Select “Local Printer”. Do not check, “Automatically detect and install my Plug and Play printer.” Click “Next”.
-Select “Create a new port”. Choose “Standard TCP/IP Port” and click “Next”.
-Input the IP Address of the Print Server, and the port name for identification, then click “Next”.
-Select “Custom”, and click “Settings”.
-Select “LPR”, and put the Port name in the field labeled “Queue Name”. For the TEW-PS1U the queue name will be the port name on the print server. You can check this using the PS Admin software by going to Server Device and click on the port..
-Then Click “OK”.
-Click “Next”.
-Click “Finish”
The Printer Install Wizard will now prompt for drivers. Select the correct
Make and Model, or click “Have Disk”, to provide the Manufacturer’s
Driver Disk.
-----Original Message-----
Subject: Printing problem with a TEW-P1U
Hello,
A few weeks ago, I bought a wireless TEW-P1U print server.
Wireless setup was fine and I got no problem to install the printer neither on my W98 computer nor on my XP notebook.
However, since that point I was never able to get a reliable printing...
Usually, I succeed to write one page but never more than 2...
It works like if the print server was sending its buffer to the printer whatever the printer status...
It provoks invalid and the printer returns a PCL-6 error status.
I tried a lot of setting (I played with all possible parameters) without any success.
My printer is a SAMSUNG ML-4600 and supports bi-directional communications.
I have no problem with a direct USB connection and no trouble between my other wireless equipments.
Do you have any suggestion ?
Is a new firmware planned soon ?
Best Regards,
Dominique.
Thank you for choosing Trendware.
Al Mundy
Technical Support Specialist
TRENDware International, INC.
3135 Kashiwa Street
Torrance, Ca 90505
Tel: 310-626-6252
Fax: 310-626-6267
Pour l'accès HTTP, pas de pb, tu browses directement l'adresse IP du serveur d'impression. Toutefois, la page n'offre pas de nouvelles fonctionnalités.
Ci-dessous la réponse du support Trendnet concernant mes pb d'impression... A priori, ce gars pense que je ne sais pas déclarer une imprimante...
Dom.
Dear Customer,
Please follow these steps for adding a printer.
Setting up Windows 2000/XP TCP/IP Printing
Following is the correct procedure for setting up TCP/IP LPR printing under Windows 2000 / XP.
-Click Start > Settings > Printers.
-Double Click “Add Printer”
-Select “Local Printer”. Do not check, “Automatically detect and install my Plug and Play printer.” Click “Next”.
-Select “Create a new port”. Choose “Standard TCP/IP Port” and click “Next”.
-Input the IP Address of the Print Server, and the port name for identification, then click “Next”.
-Select “Custom”, and click “Settings”.
-Select “LPR”, and put the Port name in the field labeled “Queue Name”. For the TEW-PS1U the queue name will be the port name on the print server. You can check this using the PS Admin software by going to Server Device and click on the port..
-Then Click “OK”.
-Click “Next”.
-Click “Finish”
The Printer Install Wizard will now prompt for drivers. Select the correct
Make and Model, or click “Have Disk”, to provide the Manufacturer’s
Driver Disk.
-----Original Message-----
Subject: Printing problem with a TEW-P1U
Hello,
A few weeks ago, I bought a wireless TEW-P1U print server.
Wireless setup was fine and I got no problem to install the printer neither on my W98 computer nor on my XP notebook.
However, since that point I was never able to get a reliable printing...
Usually, I succeed to write one page but never more than 2...
It works like if the print server was sending its buffer to the printer whatever the printer status...
It provoks invalid and the printer returns a PCL-6 error status.
I tried a lot of setting (I played with all possible parameters) without any success.
My printer is a SAMSUNG ML-4600 and supports bi-directional communications.
I have no problem with a direct USB connection and no trouble between my other wireless equipments.
Do you have any suggestion ?
Is a new firmware planned soon ?
Best Regards,
Dominique.
Thank you for choosing Trendware.
Al Mundy
Technical Support Specialist
TRENDware International, INC.
3135 Kashiwa Street
Torrance, Ca 90505
Tel: 310-626-6252
Fax: 310-626-6267
Suite et fin...
Dear Customer,
If you have followed all the steps and still not able to print through the print server, then it is highly possible that it is an incompatibility issue between the two devices.
Hello again Mr Mundy,
Unlike the Samsung ML-4500, the ML-4600 is NOT a GDI printer.
This printer is supported by other wireless print servers (such as the Asus one).
And by all linux distributions without using the GDI driver.
Dear Customer,
The ML-4600 is a GDI printer and will not work with our print servers.
Hello Mr Mundy,
First, I thank you for your response.
However, I must admit that I was rather doubtfull when I read it.
I am working with computers and printers since a while...
Anyway, I installed my printer following your instructions and the result is the same - a PCL6 error.
This printer works fine when directly connected to any of my computers.
The print server TEW-P1U is up and running fine - for everything except printing :-(
(web page, telnet, Trendnet utilities are working)
On the printer status page everything seems fine...
Manufacturer : Samsung
Model Number : ML-4600
Printing Languages Supported : PCL5E,PCL6
Current Status : Waiting for job
Other information are following:
Device Name : WPS_D0570E
System Contact :
System Location :
System Up Time : 0:40:06
Firmware Version : 6.09.21W (2003/12/24 11:51:35)
Wireless MAC Address : 00-40-01-D0-57-0E
Wireless Operation Mode : Normal
A print server unable to print is not very interesting...
Best Regards,
Dear Customer,
If you have followed all the steps and still not able to print through the print server, then it is highly possible that it is an incompatibility issue between the two devices.
Hello again Mr Mundy,
Unlike the Samsung ML-4500, the ML-4600 is NOT a GDI printer.
This printer is supported by other wireless print servers (such as the Asus one).
And by all linux distributions without using the GDI driver.
Dear Customer,
The ML-4600 is a GDI printer and will not work with our print servers.
Hello Mr Mundy,
First, I thank you for your response.
However, I must admit that I was rather doubtfull when I read it.
I am working with computers and printers since a while...
Anyway, I installed my printer following your instructions and the result is the same - a PCL6 error.
This printer works fine when directly connected to any of my computers.
The print server TEW-P1U is up and running fine - for everything except printing :-(
(web page, telnet, Trendnet utilities are working)
On the printer status page everything seems fine...
Manufacturer : Samsung
Model Number : ML-4600
Printing Languages Supported : PCL5E,PCL6
Current Status : Waiting for job
Other information are following:
Device Name : WPS_D0570E
System Contact :
System Location :
System Up Time : 0:40:06
Firmware Version : 6.09.21W (2003/12/24 11:51:35)
Wireless MAC Address : 00-40-01-D0-57-0E
Wireless Operation Mode : Normal
A print server unable to print is not very interesting...
Best Regards,
Hello,
Révoltant... je ne pense pas. Quelque soit la bonne volonté des mecs qui ont fait le TEW-P1U, des incompatibilités sont toujours possible.
Par contre, les autres constructeurs listent les imprimantes compatibles ou non...
Je suis pas mal booké en ce moment, je te passe un coup de fil lorsque j'ai un peu de temps tu veux un coup de main pour la partie wireless?
Dom.
Révoltant... je ne pense pas. Quelque soit la bonne volonté des mecs qui ont fait le TEW-P1U, des incompatibilités sont toujours possible.
Par contre, les autres constructeurs listent les imprimantes compatibles ou non...
Je suis pas mal booké en ce moment, je te passe un coup de fil lorsque j'ai un peu de temps tu veux un coup de main pour la partie wireless?
Dom.
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Je galère !!! Petite question: J'ai une HP Officejet G55. lorsque je la branche sur le p1ug le voyant ne s'allume pas. Est ce que ca veut dire qu'elle n'est pas reconnue (ou incompatible)?
Autre chose, comment passer de Ethernet à WIFI ? J'ai une alicebox et ca fait des heures que je me bats avec tout ca.
Merci d'avance pour vos reponses.
Autre chose, comment passer de Ethernet à WIFI ? J'ai une alicebox et ca fait des heures que je me bats avec tout ca.
Merci d'avance pour vos reponses.