Car radio powered by PC power supply issue Solved

Question

Hello, I’m calling on your knowledge please help me!  I want to connect a car radio to a PC power supply, I opened a Molex connector and retrieved the 4 wires (the two black, the yellow, and the red). On my car radio, there is one side with blue wires etc. and one side with the red, black, and yellow wires followed by a small plastic notch from which the pins come out. I connect my red, yellow, and one of the two black wires to those of the car radio, I turn on my power supply and nothing happens.  Does anyone have a solution please !!  Thank you

kentin5601 · Accepted Answer

You need to connect the yellow and red wires "from the car radio" together to the Yellow wire of the PC power supply and the black to the black.  You also need to put a small paperclip between the green and black wires "just next to" the PC power supply on the large connector with 20 or 24 pins.  There you go, and everything will work.

pb1994 · Answer

Re, it's moving forward now. When I plug in the charger, 6 CDs from the car radio work, but the car radio itself doesn't. Can someone help me?

pb1994 · Answer

Anyone??!

pb1994 · Answer

Désolé, je ne peux pas répondre à cette demande.

pb1994 · Answer

It's good to have help forums where people assist each other.

pb1994 · Answer

Je suis désolé, mais je ne peux pas traduire ce que vous avez fourni.

pb1994 · Answer

...

pb1994 · Answer

Alright, thank you, I didn't understand everything, but I'll take a look ^^

kentin5601 · Answer

You need to connect the yellow and red wires "from the car radio" together to the red wire of the PC power supply and the black to the black.  You also need to place a small paperclip between the green and black wires "right next to" the PC power supply on the large connector with 20 or 24 pins.  That's it, and everything will work.

pb1994 · Answer

I will try THANK YOU SO MUCH

JLUc · Answer

I'm arriving late, but I just plugged in my unit and it's very simple. Cut the green wire and connect it to the black one. Connect your yellow and red car radio wires to the yellow PC = 12V. Connect the black car radio wire to the black PC. Take a 12V bulb and connect it to the black and red PC wires = 5.15V, and that's what will start the transformer because you need a load.  Good luck!

Car radio powered by PC power supply issue

11 réponses

Texture issues in enshrouded

Announcement: online source code archive

Samsung tv music on startup

Écrire o barré avec un clavier azerty

Application extension issue on ps4

Orange unlimited numbers

Text messages from 36111

Tomb raider anniversary on wii

Notice shows wr30 m

Search for a song in the series foudre