Problème avec acer 5100

Bonjour,

réfère toi à la doc technique du portable pour connaitre le code de ces bips. Peut être un problème de RAM, si tu as 2 barrettes enlève en une et redémarre.

dyllan

AWARD Bios Beep Codes
------------------------------------------
1 short beep - System booting sucessfully.
2 short beeps - CMOS setting error.
1 long - 1 short beeps - Memory Error.
1 long - 2 short beeps - VGA card or monitor connect problem
1 long - 3 short beeps - Keyboard Error
1 long - 9 short beeps - ROM Error
Long continuous beep - Memory not installed correctly.
Short continuous beep - Power supply has problem.

= Trouble Shooting =
* Check the power supply - is it supplying power to the motherboard?

* Next, make sure all components and properly installed/fixed.
Usual suspects: CPU, BIOS chip, memory chips, etc.

* Next, check your components and user's manual: are all jumpers set
correctly?

* Remove all cards except the video adapter to make sure no other cards
are causing the problem.

* If this works, try to identify the card causing the problem.

* If none of the above works, contact your dealer or FIC support.

* Try reseating the memory (take it off and install it again).
If the error still occurs, replace the memory with known good chips.

* If you hear fatal beeps, the motherboard needs repair/servicing.

* If the error persists, check parts of the system relating to the
keyboard, e.g. try another keyboard, check to see if the system has a
keyboard fuse.
Try reseating the keyboard controller chip.
If the error still occurs, replace the keyboard chip.

* Memory error on the video adapter.
Replace the video card or the memory on the video card.

* Faulty BIOS chip.
Consult a distributor of Flash EPROM chips that can be used with the
motherboard.

Voilà ta réponse aouta ^^ merci à freaks :

1 long - 3 short beeps - Keyboard Error

dyllan