reconnect my PS3 using RCA after HDMI Solved/Closed

Question

Hello,  so here I have a PS3 that I connected via HDMI and now I want to reconnect the PS3 with the RCA cable (red, white, yellow) and it shows a completely black screen  please help me!!

bouda33 · Accepted Answer

to solve your problem without going through the settings menu, just press the power button until you hear the second beep. easy as pie!

gueust87 · Answer

You need to configure your PS3 for that.

toine594 · Answer

yes but how without the hd tv

gueust87 · Answer

or else you're not in the right mode on your TV.

ok · Answer

I had the same problem, you need to reset your PS3 in system settings. You have to format it. ++VE

toine594 · Answer

No, it's fine, I just changed the display settings; it took 30 seconds, but you have to think about that before making changes, LOL.

blazus · Answer

Hello Toine,

I'm also interested in your reset method.
I'm in the same situation.
I configured my PS3 on the HDMI port.
Currently, I'm traveling with the PS3 using the RCA cable.
I didn't take the time to switch the configuration back to RCA before unplugging the PS.
I'm stuck with a PS that I can't use.

I saw a forum saying that by turning off the PS after a certain time and then turning it back on, it automatically detects the plugged cable.
I did that, but it didn't work for me.

Any other tips would therefore be very valuable.

Thank you

zed116 · Answer

It just happened to me. Why hasn't Sony looked into the issue a bit more? I'm waiting for help like everyone else. Thank you...

Liangel · Answer

Hello everyone

I just bought a used PS3 from a private seller. Once the console was plugged in, I turned it on, but there was no signal. Since I have a working PS2, I tried the RCA cable from the PS2 on the PS3, but it didn't work.

According to your replies, it just requires a change of configuration in the PS3 menu, as rossi46du77 mentioned. However, the solution he provided only applies to those who still have an HDMI television. My situation is different. I suspect the previous owner used the console with HDMI, but I only have RCA and no way to connect it via HDMI, so I have no access to the PS3 menu since I don't have any return signal.

My question is, aside from finding someone with an HDMI television, how can I reset the console?

aiasi_42 · Answer

parameters --> default config

Liangel · Answer

[quote]I only have RCA and no way to connect via HDMI, so no access to the PS3 menu since I have no return signal.[/quote]

I'm repeating what I said above, namely that I have no view of the menu, no visual signal, so no possibility to go to settings => restore default settings. Do you have another solution?

aiasi_42 · Answer

Alright, I'm off to check the console... catch you later.

Mr. X · Answer

You have to keep pressing the button to hear the 2 beeps, and don't hesitate to insist. Very barbaric as a method but it works. ;-) Good luck guys!

aiasi_42 · Answer

but if in the main menu you go to settings -> system settings -> restore default settings

Mr. X · Answer

Yes, it resets, but it doesn't format, don't worry ;-)

aiasi_42 · Answer

oh yeah damn I'm stupid... well normally when it's off, you press and hold the power button for 5 seconds, and you hear two beeps, then it's good it's reset. keep me posted

Liangel · Answer

Here I am again  So I tried the reset by pressing the I/O button for 5 seconds and I must say it works! Thank you very much for the tip ^^

aiasi_42 · Answer

You're welcome, that's what we're here for! -- Who can do more can do less! That's cool!

tibadboy27 · Answer

Merci pour vos conseils, ça marche (restez appuyé sur la touche marche pour la réinitialiser).

olivius · Answer

Turn on the console while holding down the button with which you turned on the console until you hear one or two beeps! It works; I have a PS3 slim and had the same problem. If it doesn't work for you, then there is an issue with the console itself. It should work!

rony · Answer

THANK YOU :D

kriss · Answer

When the button on your PS3 is red, press and hold the button until you hear a second beep.
Wait 15 seconds and your screen will reset itself; at first, it may flicker but then it will be fine.
Simple as hello ;)

ps3 · Answer

Thank you very much, it works great, thanks again :)

lito68 · Answer

Hello everyone.I have a PS3 like you all. I always used it in HDMI and one day I turned on the PS3 as usual, played for a bit, then went to eat.When I came back, nothing, BLACK SCREEN. I left it on. I thought it overheated, so I turned it off and turned it back on, still nothing.Basically, my PS3 works at Micromania in HDMI.And it doesn’t work at my place.My brother’s laptop works in HDMI on my TV, so it’s not my TV that has a problem.I configured everything on the PS3, nothing. I reset it, nothing. I did the two beeps, still nothing. Does anyone have a solution? Thanks for your reply.

Arbelo · Answer

LMAO!!! I love you, I was missing [ps3] so much ^^ I didn't remember how to do it after 2 or 3 hours struggling like an idiot ^^

jordan009 · Answer

Simply hold down the power button for 5 seconds when your PS3 is on (or off, I can't remember) and POUF initial display settings!

Reconnect my PS3 using RCA after HDMI

26 réponses

Texture issues in enshrouded

Canon mb5350 - cartridge replacement impossible

Football manager (club management game)

Select next line csh foreach

Win32 kamso then rootkit detection

Win32:spyware-gen [trj] detected by avast

Unknown video error on the freebox player

Make it or break it

How to open a cbr file

Please log in with manager privileges.