Printer reset

Some additional leads to explore:
https://forums.commentcamarche.net/forum/affich-28842005-comment-reinitialiser-une-imprimante-epson-stylus-cx4300
https://forums.commentcamarche.net/forum/affich-28425101-epson-sx235w#top

Result of my computer wanderings:
 With “SSC Service Utility v4.30: I have the window that offers 3 choices
_ Ink monitor _Configuration _ Resetler
_In Configuration:
Line 1/ _installed Printers: it recognizes my printer (Epson BX300F)
Line 2/ _ Printer model: a long list of models except mine... (above)
_ In Resetler:
Available data select model: (none V) grayed out _ with no other solution???
_a test proposal at the bottom right that says: “Do you want to begin resetting? Remember to remove chip- Yes / No (I had it translated - my printer is on but nothing happens in both cases of response)

 With WicReset: free version
3 choices:
Read Waste counters _ The window gives me:
Counter 97.55% This counter will reach maximum soon.
Counter 35.85% This counter is ok.
In: Reset waste counters: I get a window with this:
_WIC RESET
_ Enter Key here
_ Valid key must contain 15 or 16 Characters
My question: is there a printer key? If not, this one is offered for a fee
To be entered in the next line Check Reset Key: in the form of 15 to 16 characters
Key to be obtained in a line below: Wic Reset Utility: (access with a paid key)
Below, more information keys. In one of which I get this somewhat alarming message:
>>>
>>>>>>>>>Manual cleaning counter: 154 // Timer cleaning counter: 7 // Cartridge replacement cleaning counter: 218 // Total print pass counter: 1,627,597 // Total print page counter: 20,099 // Last printer fatal error code 1: 0xF1 PF PID excess load error. The PF motor does not rotate at target speed even when high voltage is applied. PF Encoder failure (contaminated/detached scale, encoder board failure). PF Motor failure. PF drive mechanism overload (paper jam/foreign object). Cable disconnection. // Serial number: KPxxx // Firmware version: TT1488 //

For your information and very objectively, I have of course consulted other sites but only CCM offers viable solutions.
_ To date, I have a paid solution that remains to be tested, but before I continue my search because in many other machine references there are free solutions and my recent restoration purchases make me wince at having to pay again, even though I concede that ten euros is not the price of new.
Thanks to Flogger for his follow-up
and I will follow the forum, for myself and once the problem is resolved for others. Thanks again.

Hello and THANK YOU "Flogger" from CCM _ I finally bought the key for "Wick Reset Utility" for 8.49 euros and followed the indicated procedure. It’s perfect and quite easy (remember to copy the key beforehand to paste it later in the designated box) with a 99.55% success rate. My counters are back to zero. Thank you again!!
Gilaix