Reset a Samsung remote control.

Solved

v4d0r -

Good evening,
For a few hours now, I’ve realized that the remote control for my Samsung TV is malfunctioning. I have indeed tried changing the batteries. When I press the buttons on the remote, the red LED on the TV flashes, but it does not perform the desired action; only the sound controls work. I find this quite strange, and I would like to know if you have any idea about this issue.
Thank you in advance.
Best regards,

V4d0rConfiguration: Windows XP
Internet Explorer 7.0

4 answers

Answer 1 / 4 - Best answer
The best answer is the one that has been validated by our teams.
v4d0r Author
Problem solved. I simply changed the batteries and pressed the "Reset" button for three seconds. It is indeed very likely that the issue stemmed from that, poupougne13, given that I remembered a friend of mine had sat on the "end" of the remote control and thus must have accidentally triggered it. At first, I thought it was a shock to the remote control due to its "squeezing," but it seems that your proposed solution is indeed correct... Thank you very much for everything anyway, hoping this can help others in difficulty!
Best regards,

V4d0r

61

React
1. Pesca
  
  same remote control issue resolved
  thank you
  
  3
  
  React
2. lydia
  
  I have the same problem but how about mine (PD42C91H/PS50C91H) that doesn't have the reset button. I need your help please!!
  
  11
  
  React
3. G-master
  
  I have a Samsung Series 4 television and for the past two weeks, my remote control has not been working. I have even tried to change channels manually using the buttons on the TV but nothing works. The only button that works is the Power/Off button, so I really need your help as soon as possible.
  Thank you for your assistance.
  
  2
  
  React
4. poupougne13
  
  Re...
  
  First, try your command by looking at the beam through a camera or mobile phone screen in photo mode, to see if it emits with each button or not... then, check if you are indeed on TV at the top, and not DVD, CABLE or anything else.....
  @+
  
  -1
  
  React
5. SamsungTV
  
  same problem as G-master.
  Except that the buttons on my remote are swapped: the off button brings up the menu, while the menu button changes the source.
  That's probably why the remote seems to be malfunctioning.
  Thank you for your help.
  
  0
  
  React
Answer 2 / 4
standistyle
If, like me, some buttons on your Samsung remote control AA59-00445A are unresponsive, and none of the methods described above have worked, disassemble the remote by unclipping the battery cover and correctly reposition the buttons on the circuit board. This method worked for me when half of the buttons were not functioning.

9

React
1. Freddy33610
  
  Hello.
  For the remote control issue, I confirm the trick that works: remove the back panel, disconnect the small connector on the button side of the TV on the edge, and everything works again. Obviously, the buttons on the side are disabled, but all functions are accessible from the remote control.
  
  0
  
  React
2. Chanchan5962
  
  Hello, I have the same issue with a similar remote control but I don't know how to remove the back of my remote.
  
  Thank you for informing me as I have been without TV on the ground floor for 3 days. In fact, it is stuck on TNT antenna which I do not have. I have the Live Box 6 and my other TV works, the decoder is not the issue.
  
  I would be so grateful to receive a quick response. Otherwise, where can I acquire the same remote control?
  
  Have a nice day.
  
  0
  
  React
3. Chanchan5962
  
  Hello again, Just a small correction, my Samsung remote is slightly different: AA59-00465A and I don't see any place to unclip. Thank you again in advance. Have a great day.
  
  0
  
  React
4. Chanchan5962
  
  @Freddy33610
  Hello, in a last-ditch effort, I bought a universal remote control, Samsung type s/ Am...n.
  
  -1
  
  React
Answer 3 / 4
Jicet77
Hi,

To reset a Samsung remote, you can try this:
Hold down the Power button while pressing the 0 key.

It works for me.

Bye

26

React
1. isa
  
  My Samsung remote control AH59-02299A was only working for the home theater, not for the TV for a week (batteries changed.....)
  Problem solved by pressing the POWER and 0 buttons simultaneously
  a big THANK YOU to Jicet 77
  
  1
  
  React
2. gougou84
  
  Hi
  it worked for me too
  it was the home cinema remote that no longer recognized the TV
  remote ah59-02345a
  thank you...
  
  0
  
  React
3. RIPOUpet
  
  THANK YOU for the info €30 + the shipping costs saved
  
  -1
  
  React
4. Maxime
  
  Do you hold down the "stay" and "0" buttons for a long time? Because for me, the remote only works for the movie man and not for the helicopter TV, please :)
  
  0
  
  React
5. julie1304
  
  Thanks for the power system +0, it works perfectly!
  
  0
  
  React
Answer 4 / 4
Noos
Hi,

For those who don't have a "reset" button, for me holding down the power button for 3 seconds had the desired effect.

See you!

20

React

Reset a Samsung remote control.

4 answers

Texture issues in enshrouded

Vc++ problem

Hello, unable to open amiez since this morning

Facebook, messages, friend requests

Green screen

Upgrading from 23h2 to 24, 25, 26

Corel pinnacle18, import bug from google photos

Dial from a pc

Firefox or google

Malware midnight mimosa, android factory-fresher hacking