Graver avec K3b

Fermé
angelsmatt Messages postés 47 Date d'inscription vendredi 23 juillet 2004 Statut Membre Dernière intervention 23 décembre 2004 - 31 juil. 2004 à 13:15
angelsmatt Messages postés 47 Date d'inscription vendredi 23 juillet 2004 Statut Membre Dernière intervention 23 décembre 2004 - 31 juil. 2004 à 21:21
Slt

C'est encore moi,
bon encore un soucis
K3b veut pas graver !
I il me dit que mon graveur ne fais pas Disk-at-Once alors que si
donc je select Track-at-Once, ca c pa grave
II Il me dis qu'il y a un pb avec le buffer et qu'il faut baisser la vitesse (je passe de 52x a 16x qd mm) avec cette erreur :

System
-----------------------
K3b Version:0.11.12
KDE Version: 3.2.3
QT Version: 3.3.2

cdrecord
-----------------------
scsidev: 'ATAPI:/dev/hdc'
devname: 'ATAPI:/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Drive does not support TAO recording.
/usr/bin/cdrecord: Illegal write mode for this drive.
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX320E '
Revision : 'NYK1'
Device seems to be: Generic CD-ROM.
Using generic SCSI-2 CD driver (scsi2_cd).
Driver flags :
Supported modes:
FIFO size : 2097152 = 2048 KB

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=ATAPI:/dev/hdc speed=52 -eject fs=2m -data -tsize=359808s -

mkisofs
-----------------------
359808
Using _BAKU_BAKURETSU_HUNTERS_000.OGM;1 for /[baku]Bakuretsu_Hunters_-_19.ogm ([baku]Bakuretsu_Hunters_-_18.ogm)
Using _BAKU_BAKURETSU_HUNTERS_001.OGM;1 for /[baku]Bakuretsu_Hunters_-_18.ogm ([baku]Bakuretsu_Hunters_-_17.ogm)
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid BakuretsuH_17-20 -volset -appid K3b -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bwESewb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bjQ2s0a.tmp

III une fois passé en 16x il me fait tjs la tete :

System
-----------------------
K3b Version:0.11.12
KDE Version: 3.2.3
QT Version: 3.3.2

cdrecord
-----------------------
scsidev: 'ATAPI:/dev/hdc'
devname: 'ATAPI:/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
/usr/bin/cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target.
/usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page.
/usr/bin/cdrecord: Cannot get CD capabilities data.
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX320E '
Revision : 'NYK1'
Device seems to be: Generic CD-ROM.
Using generic SCSI-2 CD driver (scsi2_cd).
Driver flags :
Supported modes:
FIFO size : 2097152 = 2048 KB
/usr/bin/cdrecord: Drive does not support TAO recording.
/usr/bin/cdrecord: Illegal write mode for this drive.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=ATAPI:/dev/hdc speed=52 -eject fs=2m -data -tsize=359808s -

mkisofs
-----------------------
359808
Using _BAKU_BAKURETSU_HUNTERS_000.OGM;1 for /[baku]Bakuretsu_Hunters_-_19.ogm ([baku]Bakuretsu_Hunters_-_18.ogm)
Using _BAKU_BAKURETSU_HUNTERS_001.OGM;1 for /[baku]Bakuretsu_Hunters_-_18.ogm ([baku]Bakuretsu_Hunters_-_17.ogm)
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid BakuretsuH_17-20 -volset -appid K3b -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bb8HZXa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bKQt9ba.tmp

SVP aidez moi j'y arrive vraiment pas !

@+ angelsmatt

1 réponse

angelsmatt Messages postés 47 Date d'inscription vendredi 23 juillet 2004 Statut Membre Dernière intervention 23 décembre 2004
31 juil. 2004 à 21:21
J'ai trouvé la solution.
En fait une fois le fichier lilo.conf éditer il fallait taper "lilo" en console pour appliquer les changements (pour emuler le graveur ide en scsi) et a partir de la K3b a vu mon graveur non plus sous /dev/hdc ms sous /dev/sr0 :D
Et là magik plu d'erreur !
Tout fonctionne !

@+ angelsmatt
0