View original (French)

SANGHA CB 130 Webcam

Solved
manaseg Posted messages 21 Status Member -  
 Ironie -
Hello,
I've just been given this camera without its installation CD... On the manufacturer's website, the driver is available for download (2007051410_setup.exe, 115 KB application type) which is fine, but I can't install it afterwards... Does anyone have a solution to make it usable?
Thanks everyone
Configuration: Windows XP Internet Explorer 7.0

7 answers

  1.
    zorro88 Posted messages 150 Status Member 4
     
    how is that impossible, what message do you have?
    --
    contact me by email if it's urgent, just click on my username to see my msn
    0
  2. manaseg Posted messages 21 Status Member
     
    Good evening,
    Thank you for taking an interest in my problem, the urgency is not paramount but.....
    Just no message....I double click on the program 200705....and nothing, nada, zip! No trace in "all programs" or "add/remove" in the control panel. If I need to look elsewhere, then I really don't know and that exceeds my skills.
    The camera is recognized by the USB port, but the message....a problem has occurred, your hardware may not function....The installation through "add program" focuses on "D" and does not complete. I burned a CD of the 200705... but it's still a failure
    Is the original CD essential? Surprising, but this driver is absent from all specialized sites ("all drivers", etc...)?
    Thank you again for your insights if these details inspire you.
    0
  3. manaseg Posted messages 21 Status Member
     
    ??? Yes, 2007051410......that's strange?
    0
  4. zorro88 Posted messages 150 Status Member 4
     
    Did you say you burned the file onto a CD??
    --
    Contact me by email if it's urgent, just click on my username to see my MSN.
    -1
    1. Ironie
       
      but no, not at all, he was just joking of course
      0
  6. zorro88 Posted messages 150 Status Member 4
     
    No, it's fine, but after you put it on CD, you put the CD in the player and connect your camera.
    --
    Contact me by email if it's urgent, just click on my username to see my MSN.
    -1
    1. manaseg Posted messages 21 Status Member
       
      Problem solved...... the downloaded program needed to be unzipped!!! (had to guess, as there was no specific mention) following the installation of the unzipper and the usual procedure.... it's OK. (For your information, low quality level of this WC).
      Special thanks to you, zorro 88.
      0
      1. ballon86100 > manaseg Posted messages 21 Status Member
         
        Salut Manaseg, j'ai une caméra Sangha CB130 et je n'arrive pas à ouvrir le dossier. Pourrais-tu me l'envoyer sur ma boîte mail car ça commence à m'énerver.
        0
  7. manaseg Posted messages 21 Status Member
     
    Manipulation done... result: message from the taskbar "the unknown USB device is a high-speed device and will operate at reduced speed if connected to a low-speed port." In the hierarchy? yellow "unknown USB device."
    Nothing else is offered!!!
    -1
    1. Virgo
       
      Hello manaseg
      I'm having trouble getting this webcam to work, could you please send me the file 2007051410_setup.exe to my address? Or let me know the site where you found it?
      Thank you in advance!
      0
      1. manaseg > Virgo
         
        Good evening,
        It’s doable, but I don’t have your address.... It’s available for free on the "SANGHA" website (please decompress it to avoid, as explained, my disappointment, before installing it)
        If there’s a problem, I can send it to you with your address.
        Best regards
        0
      2. tristan > manaseg
         
        Salut, pourrais-tu me l'envoyer s'il te plaît ? Je n'arrive pas à le trouver.
        0
      3. Marco69 > manaseg
         
        With which software do you unzip?
        How do you unzip since the file is an .exe?
        Huh?

        Thanks
        0
  8. Epica68
     
    Hello, I have the file 2007051410.exe but I can't open it or unzip it as you said (damaged archive format). Could you help me?
    Thanks
    Elodie
    -1