E5 Error Message ON MP150 PRINTER
ROUXAGNES
Posted messages
1
Status
Membre
-
pouetcamembert Posted messages 3 Status Membre -
pouetcamembert Posted messages 3 Status Membre -
Hello,
Following a refill of 2 cartridges for my PIXMA MP150 printer, it no longer works.
Since I performed a cleaning of the printer via the printer properties, an error message E5 appears and my printer no longer works.
I can't find the source of the error?
If anyone can advise me?
Thanks in advance.
AROUX
Following a refill of 2 cartridges for my PIXMA MP150 printer, it no longer works.
Since I performed a cleaning of the printer via the printer properties, an error message E5 appears and my printer no longer works.
I can't find the source of the error?
If anyone can advise me?
Thanks in advance.
AROUX
Configuration: Windows XP Firefox 2.0.0.16
2 réponses
Try this solution:
To be tested on the Pixma MP140, MP150, MP160, MP180, MP210, etc...
Solution:
Unplug the printer's power cable.
Press and hold the "Power" button.
Plug the power cable back in.
While still holding "Power", press "Reset" (red circle and triangle) 2 times.
Release the "Power" button. The printer should take 10 seconds to start and display 0. If not, follow the procedure.
Press the + button to switch from 0 to 1.
Press the "Color" button (green diamond) once: 2 lights will illuminate: normal paper and photo paper. Load paper into the tray.
Press "Power" twice and it will print some bands and graphics. If it doesn't print, press "COLOR" or "RESET" once (it depends on the machines).
The display returns to 0.
Open the cover and remove the cartridges.
While leaving the cover open, unplug the power cable.
Close the cover and plug the cable back in.
Reinstall the cartridges.
Close the cover and restart by pressing "Power".
http://imprimante-en-question.blogspot.com/2011/04/reset-des-cartouches-sur-certaines.html
To be tested on the Pixma MP140, MP150, MP160, MP180, MP210, etc...
Solution:
Unplug the printer's power cable.
Press and hold the "Power" button.
Plug the power cable back in.
While still holding "Power", press "Reset" (red circle and triangle) 2 times.
Release the "Power" button. The printer should take 10 seconds to start and display 0. If not, follow the procedure.
Press the + button to switch from 0 to 1.
Press the "Color" button (green diamond) once: 2 lights will illuminate: normal paper and photo paper. Load paper into the tray.
Press "Power" twice and it will print some bands and graphics. If it doesn't print, press "COLOR" or "RESET" once (it depends on the machines).
The display returns to 0.
Open the cover and remove the cartridges.
While leaving the cover open, unplug the power cable.
Close the cover and plug the cable back in.
Reinstall the cartridges.
Close the cover and restart by pressing "Power".
http://imprimante-en-question.blogspot.com/2011/04/reset-des-cartouches-sur-certaines.html