Jvc grd20 (condensation issue)

nico -  
FranckDRY Posted messages 3 Status Membre -
Hello,
I have a JVC GR-D20 camcorder and since last week when I try to use it, everything freezes and the screen shows (please wait condensation). The manual says to wait for an hour because it’s a condensation issue. Nonetheless, the problem keeps coming back systematically; could it be that the battery needs to be changed?
Configuration: Windows XP Internet Explorer 6.0

3 réponses

Amy Bee Posted messages 7 Registration date   Status Membre
 
Good evening,
I had the same issue and I came across this site: http://www.pechorin.com/...

It worked for me. No problems since.

However, I have another issue that still isn't resolved, if you have a solution...: the power/charge indicator does not light up when I try to charge the battery, and therefore it does not charge. I can only use my cam on mains power... ... ...
0
nico
 
hello, thank you for your response. for your warning light issue, could it simply be the battery that needs to be replaced?
0
Amy Bee Posted messages 7 Registration date   Status Membre
 
Hi,
Unfortunately not, I tried with 3 different batteries. Same problem... Thank you anyway.
0
chipietoung
 
Hello, I have 2 problems with my JVC GR-D20 camcorder. One is the condensation message that keeps appearing, and the other is that when I plug it in to charge, the light doesn’t blink anymore and it doesn’t charge. I resolved the second issue by playing with the plug; when I connect it to the camcorder, I pull it out slightly until the light starts blinking and charging begins. It’s a contact issue.

Best regards.
0
nico > chipietoung
 
Thank you for your response.
0
FranckDRY Posted messages 3 Status Membre
 
Hi,

I have the same issue, did you find a solution?
Thank you
Best regards
Franck
0