How to connect to the site http://192.168.1

Hi
this is the IP of the live box!
just enter the credentials you received with your box.

identifier: admin

password: admin

there you go, quite simple!

Yes, but in order to connect to the box’s site, you need to ensure that your box is turned on and also in pairing mode. Then you will be able to connect to its site.
How do you connect the second computer to your box? Via Wi-Fi?

admin
admin
c tou

I know it’s been a while, but I'm still posting the solution:

Username: admin
Password: admin

If it doesn't work, it's because you changed the password.
If you don’t remember it, unplug your Livebox from the power, press buttons 1 and 2 at the same time, and plug your Livebox back in while still holding them until only the third light is on (factory reset). Once that’s done, you just need to enter your username and the internet access password provided in your paperwork.

You just need to mark it as resolved for better clarity in the forum, thanks.

Hello,
To log in, open a page in Internet Explorer and the passwords are both admin; then you will need to enter your credentials. Good luck!

Well, you connect via the RJ45 with your second computer (you do it as if it were your first connection), you configure it and disable the TV.
If there are 2 RJ45 ports on your machine, however, there is only one on the box, right?

User: enter:admin

Password: see on the back of the BOX (Choose the username) to enter.

This should work!

See you later!

Yes, but you can only plug in 1 Ethernet cable into the box! So you need to do the same thing you did when you connected your first computer by connecting the second one.
In any case, to access the site 192.168.1.1, the box needs to be connected and in pairing mode (small black button underneath).

Hello
to open your box interface, you need to type the address 192.168.1.1.
To then access the various settings, one solution is to enter Admin in the first field and the WEP key written on your neuf-box in the second field, then click "continue."
Blessed is he who, like the river, can follow its course without leaving its bed!

HI!!! Listen, I had the same problem! But you just need to turn your box around and everything is written there... Actually, I thought I had to enter my own name and password... So it was written what was supposed to be for me, which was: "admin" and "password". It’s just that simple!!! Cheers

pseudo: admin
code: you put admin

if you haven't changed anything:
username admin and password admin

Hello, type admin as the username
and admin as the password
and there you go, you have access to your livebox configuration.

the name: admin
the password: admin

Why do you want to go to this address?