Ajout mémoire
Résolu
gyneriums
Messages postés
116
Statut
Membre
-
Utilisateur anonyme -
Utilisateur anonyme -
Bonjour,
J'ai AMD Athlon 64 Processor 3400+ 2,21 GHz et 448 Mo de RAM. Je voudrais ajouter de la mémoire. Quelle est la meilleure solution? ajouter 1 mémoire de 520. Au fait combien de place j'aurai pas rajouter des barettes? mon ordi Acer à 1 an 1/2. Merci. Bonne journée à tous. Cordialement.
J'ai AMD Athlon 64 Processor 3400+ 2,21 GHz et 448 Mo de RAM. Je voudrais ajouter de la mémoire. Quelle est la meilleure solution? ajouter 1 mémoire de 520. Au fait combien de place j'aurai pas rajouter des barettes? mon ordi Acer à 1 an 1/2. Merci. Bonne journée à tous. Cordialement.
9 réponses
Avec le logiciel CPU-Z onglet mainboard, parceque la on n'as pas de renseignement
Je supose que tu veur ajouté de la Ram c ça , et pourquoi telecharger CPU-Z ce logiceil et pour le cpu plutot.
mai bon pour ajouter de la ram il faut dabord voir quel type , soit dur type DDR ou DDR2 pour toi je pense que c du DDR1 , car il sont pas le meme format ni les meme critèere. ta qua voir sur google limage dune ddr et dune ddr2
et Pour pour les emplacement , je croi que ça peut être compliquer de fair du paratic donc ouvrir l'uc et verifier sur place , le reste c'ets assez facile , fait cela dabord
mai bon pour ajouter de la ram il faut dabord voir quel type , soit dur type DDR ou DDR2 pour toi je pense que c du DDR1 , car il sont pas le meme format ni les meme critèere. ta qua voir sur google limage dune ddr et dune ddr2
et Pour pour les emplacement , je croi que ça peut être compliquer de fair du paratic donc ouvrir l'uc et verifier sur place , le reste c'ets assez facile , fait cela dabord
ta un acer avec carte mère Azuz ; ok , normalement tu devrai avoir au moin 4 bank dont une est déja équipé avec 512 de Ram dont 64 en partage avec la carte graphique . Vaut mieu ajouter une DDr de 512 ou plut , vu que ton pc est assembler je supose que tt les marque s'est mette sans prb. et puis ça depand pourquoi tu ajoute de la ram ?
oui plut rapide pour les jeux c vrai , et aui pour Vista , mais pour les jeux il te faut un bone carte graphique , mais c toujours preferable davoir plut de Ram dans le Pc
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Re!
D'abord desole si tu as cru que je m'enervais, je n'etais pas enerve du tout :)
Bon, CPU-Z malheureusement beaucoup de personne disent qu'il ne sert quepour le processuer, c'est un tres bon logiciel, qui donne le type de RAM, le nom de la carte mere aussi, je voulais connaitre le nom de la CM pour voir la frequence RAM et autres choses encore pour ne pas te tromper sur la RAM
Voici ou telecharger le logiciel:
https://www.commentcamarche.net/telecharger/utilitaires/6615-cpu-z/
Et apres fait des capture d'ecran avec le logiciel dans les onglets mainboard et SPD, puis heberge les photos sur https://www.hiboox.com/ et donne nousle lien pour quejepuisse les voir
Sur cette océan qu'est le web, un site mérite d'être consulté: siteduzero.com
Vous avez pratiquement tout pour créer votre site web, votre jeux 3D...
D'abord desole si tu as cru que je m'enervais, je n'etais pas enerve du tout :)
Bon, CPU-Z malheureusement beaucoup de personne disent qu'il ne sert quepour le processuer, c'est un tres bon logiciel, qui donne le type de RAM, le nom de la carte mere aussi, je voulais connaitre le nom de la CM pour voir la frequence RAM et autres choses encore pour ne pas te tromper sur la RAM
Voici ou telecharger le logiciel:
https://www.commentcamarche.net/telecharger/utilitaires/6615-cpu-z/
Et apres fait des capture d'ecran avec le logiciel dans les onglets mainboard et SPD, puis heberge les photos sur https://www.hiboox.com/ et donne nousle lien pour quejepuisse les voir
Sur cette océan qu'est le web, un site mérite d'être consulté: siteduzero.com
Vous avez pratiquement tout pour créer votre site web, votre jeux 3D...
Bonjour bogosstar42, je suis plus que novice et je ne sais pas si c'est cue tu me demandais, j'ai fait plusieurs manip. pour arriver à ce résultat. Qu'est ce une capture d'écran et comment la faire, j'ai trouvé les 2 onglets dont tu me parles, avec le bouton droit de la souris : transférer la fenêtre sur Proview... ce que j'ai fait pour les 2 onglets, mais après je ne les trouve plus???!!
Merci
CPU-Z Readme file
------------------
Version 1.44.2
Mars 2008
Contact : cpuz@cpuid.com
Web page: https://www.cpuid.com/softwares/cpu-z.html
Validation page : http://valid.x86-secret.com/
Forum : http://forum.x86-secret.com/forumdisplay.php?f=16
CPUID SDK : http://www.cpuid-pro.com/devkits.php
CPU-Z is a freeware and can be freely distributed.
Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=ON
MaxPCIBus=256
DMI=ON
Sensor=ON
SMBus=ON
- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF disables sensor chip detection and voltages measurement.
- PCI : Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision.
- SMBus : Set to OFF disables SMBus information : SPD, and, depending on the hardware, sensoring information.
Parameters
----------
-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.
-html=filename : Same as "-txt" except it generates the html report.
-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).
Keys
----
F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory
Cache Latency Tool
------------------
The cache latency tool can be downloaded at that address : http://www.cpuid.com/download/latency.zip
History
-------
--------------------------------------------------------------------------------------------------
1.44.2 - Mars 2008
- NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2)
- Intel G35 chipset (1.44.2)
- Updated support for VIA chipsets (1.44.2)
- Support for the new validator (1.44.1)
- Preliminary support for VIA Isaiah processor.
- Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden.
- Memory timings on Intel 5400A/B MCH (Skulltrail).
- Fix AMD Phenom detection issue on Windows Vista 64.
MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6
--------------------------------------------------------------------------------------------------
1.43 - January 2008
- Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH).
- Intel X48 chipset detection.
- AMD Athlon 64-LE 1600 and 1620 support.
- Fix detection issues on unlocked Phenom (ES/BE).
--------------------------------------------------------------------------------------------------
1.42 - November 2007
- Intel Wolfdale/Yorkfield/Penryn CPUs support.
- AMD Phenom and Opteron Barcelona support improved.
- Current core selection menu (right click on the CPU page).
- Loading progress.
--------------------------------------------------------------------------------------------------
1.41 - September 2007
- New CPU voltage monitoring.
- Intel Xeon Tigerton support.
- Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe).
- AMD K10 Phenom preliminary support.
- NVIDIA MCP73 support.
- Intel XMP profiles support.
- Memory modules nominal voltage.
--------------------------------------------------------------------------------------------------
1.40.5 - July 2007
- NVIDIA nForce 560 chipset support.
- Intel Dynamic FSB technology support.
- Athlon 64 X2 BE & Sempron LE (TDP 45W).
- SiS671/FX/DX/MX northbridge support.
- SiS968 southbridge support.
--------------------------------------------------------------------------------------------------
1.40 - May 2007
- VIA P4M800CE chipset support.
- Preliminary support for Intel Penryn CPUs family (45 nm).
- Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition.
- Intel P35, G33, G31, Q35, Q33, X38 chipsets support.
- Intel GL960/GM965/PM965 chipsets support.
- AMD Athlon 64 "Lima" processor support.
- AMD Geode LX processor support.
- NVIDIA nForce 520 chipset support.
- New parameter "-console" to generate output in a command prompt (Windows XP only).
- New icon.
--------------------------------------------------------------------------------------------------
1.39 - February 2007
- Windows Vista 64 support.
- VIA CX700/VX700 chipset.
- Added Merom XE (X7900/X7800)
- Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning.
- Added "-core" parameter to display the clock speed of the specified core.
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.38 - November 2006
- VIA P4M890 and P4M900 chipsets.
- NVIDIA 650i and 680i chipset.
- AMD Athlon 64 FX-7x processor.
- Core 2 Duo E6850, E6750, E6650 processors.
- socket 775 Xeon processor.
- New parameters "-txt" and "-html" (see above).
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.37 - October 2006
- Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support.
- Changed SSE4 to SSSE3 (Supplemental SSE3).
- Added VIA VT8237A southbridge.
- New HTML report.
- Several bug fixes.
--------------------------------------------------------------------------------------------------
1.36 - August 2006
- New processor information display.
- Intel 5000X/P/Z/V SPD support.
- Intel Pentium D 925 & 945.
--------------------------------------------------------------------------------------------------
1.35 - June 2006
- ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support.
- ATI SB600 southbridge support.
- Intel P965 chipset support.
- Engineering samples Core based CPUs report.
- Windows Vista product line report.
--------------------------------------------------------------------------------------------------
1.34.1 - May 2006
- AMD socket AM2/S1/F (rev F.) CPUs support.
- Enhanced Performance Profile (EPP) memory information report.
- Added Trc (bank cycle time) in DDR2 SPD report.
- Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets.
- FB-DIMM DDR2 SPD information report.
- Core 2 Duo names and logos added.
- Turion 64 X2 logo added.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.33.1 - April 2006
- Intel i965 chipset support added.
- Fix SPD detection problem on SiS 964/965/966 southbridges.
- ODC (Odd Divisor Correct) for Athlon64 rev E.
--------------------------------------------------------------------------------------------------
1.33 - April 2006
- Memory Command Rate timing added.
- Improved support for Intel Conroe/Merom CPUs.
- Celeron M 420/430 Yonah.
- Xeon Dual core Dempsey.
- VIA C7-M CPU detection added.
- VIA PT880, PT880 Pro, K8T900 chipsets support.
- nVidia nForce 550/560/570 (MCP55) chipset support.
- VIA VT8251 southbridge support.
- Fixed HyperTransport information misreports (in dump file).
- Added K6-2 and K6-III logos.
--------------------------------------------------------------------------------------------------
1.32.1 - March 2006
- New Intel logos.
- Added Pentium D 925, Pentium EE 965.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.32 - February 2006
- Athlon FX-60 detection added.
- Athlon64 new memory dividers.
- Celeron 35x Cedar Mill, Pentium D 805.
- Core Solo & Core Duo detection improved.
- VIA C7 CPU detection added.
- Intel i975X, i945GT chipsets support.
- ATI RD580 chipset support.
- ULi smbus support improved.
- Fix smbus conflict with ClockGen.
--------------------------------------------------------------------------------------------------
1.31 - November 2005
- Improved support for ATI RS480/482 chipsets.
- GeForce 6100/6150 (nForce 410/430) chipsets support.
- Intel E7520 chipset support.
- New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler,
Intel Xeon Paxville, Intel Pentium M Yonah SC & DC.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.30 - August 2005
- Latest Sempron and Turion support improved.
- Intel Xeon Potomac, Pentium M 780 support.
- Improved Windows version report.
- Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges.
- Increased clocks refresh rate.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.29 - June 2005
- New PCI devices report.
- Switch for VCore report in .ini file.
- VCore report on some uGuru mainboards.
- Improved clocks computation.
- Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T).
- Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset.
- Improved stability when several instances of CPU-Z are running in the same time.
- Restored html report in ghost mode (see "Parameters" chapter above).
--------------------------------------------------------------------------------------------------
1.28.6 - March 2005
- Support for Athlon 64 X2 CPUs
- Support for i955X chipset
- Bunch of bugs
--------------------------------------------------------------------------------------------------
1.28 - March 2005
- Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656
- Support for nVidia nForce4 SLI Intel Edition
- Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252
- New F7 key to simplifiy the creation of the validation file
--------------------------------------------------------------------------------------------------
1.27 - February 2005
- Support for Intel Pentium 4 6xx CPUs.
- New validation system.
- Hundred of bug fixes.
--------------------------------------------------------------------------------------------------
1.26 - December 2004
- VCore display on Pentium M CPUs.
- New CPU clock computation.
- Improved support of Transmeta CPUs.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.25 - November 2004
- nVidia nForce4 chipset support
- Intel Pentium 4J support
- New button to refresh memory timings
- Several bugs fixed
--------------------------------------------------------------------------------------------------
1.24 - September 2004
- AMD Sempron support
- New memory SPD page
- PCI-Express graphic interface support
- Configuration file
- External cache latency tool
- Restored html report
- Fix several bugs
--------------------------------------------------------------------------------------------------
1.23 - June 2004
- Intel i915P/G, i925X chipsets support
- Intel LGA775 CPUs support
- Intel's CPU number display
- New AMD Athlon 64 steppings
- New report in one file
--------------------------------------------------------------------------------------------------
1.22 - April 2004
- New CPUs : Xeon Nocona, Celeron Prescott
- DDR2 memory support
- Clock mode when iconized
--------------------------------------------------------------------------------------------------
1.21 - January 2004
- one file package
- Windows 64 support
- new chipsets support
- new CPU support : Celeron M, Pentium 4 "Prescott"
--------------------------------------------------------------------------------------------------
1.20a - October 2003
- memory frequency and ratio on nForce2
- KT600 support
- W83627THF VRM mode
- SPD read improvement
- Fix some memory leaks (DMI)
- Fix memory size report
- Fix AGP side band status
Merci
CPU-Z Readme file
------------------
Version 1.44.2
Mars 2008
Contact : cpuz@cpuid.com
Web page: https://www.cpuid.com/softwares/cpu-z.html
Validation page : http://valid.x86-secret.com/
Forum : http://forum.x86-secret.com/forumdisplay.php?f=16
CPUID SDK : http://www.cpuid-pro.com/devkits.php
CPU-Z is a freeware and can be freely distributed.
Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=ON
MaxPCIBus=256
DMI=ON
Sensor=ON
SMBus=ON
- TextFontName : Font used for the information boxes.
- TextFontSize : Size of the font used for the information boxes.
- TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- LabelFontName : Font used for the label boxes.
- LabelFontSize : Size of the font used for the label boxes.
- Sensor : Set to OFF disables sensor chip detection and voltages measurement.
- PCI : Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information.
- MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- DMI : Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision.
- SMBus : Set to OFF disables SMBus information : SPD, and, depending on the hardware, sensoring information.
Parameters
----------
-txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
in the same directory as the exe file.
-html=filename : Same as "-txt" except it generates the html report.
-core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).
Keys
----
F5 : save the current tab in a bmp file
F6 : save the current tab in the clipboard
F7 : save cvf file in the current directory
Cache Latency Tool
------------------
The cache latency tool can be downloaded at that address : http://www.cpuid.com/download/latency.zip
History
-------
--------------------------------------------------------------------------------------------------
1.44.2 - Mars 2008
- NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2)
- Intel G35 chipset (1.44.2)
- Updated support for VIA chipsets (1.44.2)
- Support for the new validator (1.44.1)
- Preliminary support for VIA Isaiah processor.
- Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden.
- Memory timings on Intel 5400A/B MCH (Skulltrail).
- Fix AMD Phenom detection issue on Windows Vista 64.
MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6
--------------------------------------------------------------------------------------------------
1.43 - January 2008
- Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH).
- Intel X48 chipset detection.
- AMD Athlon 64-LE 1600 and 1620 support.
- Fix detection issues on unlocked Phenom (ES/BE).
--------------------------------------------------------------------------------------------------
1.42 - November 2007
- Intel Wolfdale/Yorkfield/Penryn CPUs support.
- AMD Phenom and Opteron Barcelona support improved.
- Current core selection menu (right click on the CPU page).
- Loading progress.
--------------------------------------------------------------------------------------------------
1.41 - September 2007
- New CPU voltage monitoring.
- Intel Xeon Tigerton support.
- Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe).
- AMD K10 Phenom preliminary support.
- NVIDIA MCP73 support.
- Intel XMP profiles support.
- Memory modules nominal voltage.
--------------------------------------------------------------------------------------------------
1.40.5 - July 2007
- NVIDIA nForce 560 chipset support.
- Intel Dynamic FSB technology support.
- Athlon 64 X2 BE & Sempron LE (TDP 45W).
- SiS671/FX/DX/MX northbridge support.
- SiS968 southbridge support.
--------------------------------------------------------------------------------------------------
1.40 - May 2007
- VIA P4M800CE chipset support.
- Preliminary support for Intel Penryn CPUs family (45 nm).
- Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition.
- Intel P35, G33, G31, Q35, Q33, X38 chipsets support.
- Intel GL960/GM965/PM965 chipsets support.
- AMD Athlon 64 "Lima" processor support.
- AMD Geode LX processor support.
- NVIDIA nForce 520 chipset support.
- New parameter "-console" to generate output in a command prompt (Windows XP only).
- New icon.
--------------------------------------------------------------------------------------------------
1.39 - February 2007
- Windows Vista 64 support.
- VIA CX700/VX700 chipset.
- Added Merom XE (X7900/X7800)
- Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning.
- Added "-core" parameter to display the clock speed of the specified core.
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.38 - November 2006
- VIA P4M890 and P4M900 chipsets.
- NVIDIA 650i and 680i chipset.
- AMD Athlon 64 FX-7x processor.
- Core 2 Duo E6850, E6750, E6650 processors.
- socket 775 Xeon processor.
- New parameters "-txt" and "-html" (see above).
- Lot of bug fixes.
--------------------------------------------------------------------------------------------------
1.37 - October 2006
- Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support.
- Changed SSE4 to SSSE3 (Supplemental SSE3).
- Added VIA VT8237A southbridge.
- New HTML report.
- Several bug fixes.
--------------------------------------------------------------------------------------------------
1.36 - August 2006
- New processor information display.
- Intel 5000X/P/Z/V SPD support.
- Intel Pentium D 925 & 945.
--------------------------------------------------------------------------------------------------
1.35 - June 2006
- ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support.
- ATI SB600 southbridge support.
- Intel P965 chipset support.
- Engineering samples Core based CPUs report.
- Windows Vista product line report.
--------------------------------------------------------------------------------------------------
1.34.1 - May 2006
- AMD socket AM2/S1/F (rev F.) CPUs support.
- Enhanced Performance Profile (EPP) memory information report.
- Added Trc (bank cycle time) in DDR2 SPD report.
- Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets.
- FB-DIMM DDR2 SPD information report.
- Core 2 Duo names and logos added.
- Turion 64 X2 logo added.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.33.1 - April 2006
- Intel i965 chipset support added.
- Fix SPD detection problem on SiS 964/965/966 southbridges.
- ODC (Odd Divisor Correct) for Athlon64 rev E.
--------------------------------------------------------------------------------------------------
1.33 - April 2006
- Memory Command Rate timing added.
- Improved support for Intel Conroe/Merom CPUs.
- Celeron M 420/430 Yonah.
- Xeon Dual core Dempsey.
- VIA C7-M CPU detection added.
- VIA PT880, PT880 Pro, K8T900 chipsets support.
- nVidia nForce 550/560/570 (MCP55) chipset support.
- VIA VT8251 southbridge support.
- Fixed HyperTransport information misreports (in dump file).
- Added K6-2 and K6-III logos.
--------------------------------------------------------------------------------------------------
1.32.1 - March 2006
- New Intel logos.
- Added Pentium D 925, Pentium EE 965.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.32 - February 2006
- Athlon FX-60 detection added.
- Athlon64 new memory dividers.
- Celeron 35x Cedar Mill, Pentium D 805.
- Core Solo & Core Duo detection improved.
- VIA C7 CPU detection added.
- Intel i975X, i945GT chipsets support.
- ATI RD580 chipset support.
- ULi smbus support improved.
- Fix smbus conflict with ClockGen.
--------------------------------------------------------------------------------------------------
1.31 - November 2005
- Improved support for ATI RS480/482 chipsets.
- GeForce 6100/6150 (nForce 410/430) chipsets support.
- Intel E7520 chipset support.
- New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler,
Intel Xeon Paxville, Intel Pentium M Yonah SC & DC.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.30 - August 2005
- Latest Sempron and Turion support improved.
- Intel Xeon Potomac, Pentium M 780 support.
- Improved Windows version report.
- Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges.
- Increased clocks refresh rate.
- Several bug fixed.
--------------------------------------------------------------------------------------------------
1.29 - June 2005
- New PCI devices report.
- Switch for VCore report in .ini file.
- VCore report on some uGuru mainboards.
- Improved clocks computation.
- Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T).
- Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset.
- Improved stability when several instances of CPU-Z are running in the same time.
- Restored html report in ghost mode (see "Parameters" chapter above).
--------------------------------------------------------------------------------------------------
1.28.6 - March 2005
- Support for Athlon 64 X2 CPUs
- Support for i955X chipset
- Bunch of bugs
--------------------------------------------------------------------------------------------------
1.28 - March 2005
- Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656
- Support for nVidia nForce4 SLI Intel Edition
- Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252
- New F7 key to simplifiy the creation of the validation file
--------------------------------------------------------------------------------------------------
1.27 - February 2005
- Support for Intel Pentium 4 6xx CPUs.
- New validation system.
- Hundred of bug fixes.
--------------------------------------------------------------------------------------------------
1.26 - December 2004
- VCore display on Pentium M CPUs.
- New CPU clock computation.
- Improved support of Transmeta CPUs.
- Several bugs fixed.
--------------------------------------------------------------------------------------------------
1.25 - November 2004
- nVidia nForce4 chipset support
- Intel Pentium 4J support
- New button to refresh memory timings
- Several bugs fixed
--------------------------------------------------------------------------------------------------
1.24 - September 2004
- AMD Sempron support
- New memory SPD page
- PCI-Express graphic interface support
- Configuration file
- External cache latency tool
- Restored html report
- Fix several bugs
--------------------------------------------------------------------------------------------------
1.23 - June 2004
- Intel i915P/G, i925X chipsets support
- Intel LGA775 CPUs support
- Intel's CPU number display
- New AMD Athlon 64 steppings
- New report in one file
--------------------------------------------------------------------------------------------------
1.22 - April 2004
- New CPUs : Xeon Nocona, Celeron Prescott
- DDR2 memory support
- Clock mode when iconized
--------------------------------------------------------------------------------------------------
1.21 - January 2004
- one file package
- Windows 64 support
- new chipsets support
- new CPU support : Celeron M, Pentium 4 "Prescott"
--------------------------------------------------------------------------------------------------
1.20a - October 2003
- memory frequency and ratio on nForce2
- KT600 support
- W83627THF VRM mode
- SPD read improvement
- Fix some memory leaks (DMI)
- Fix memory size report
- Fix AGP side band status
Malheureusement, la on n'as pas grand chose, pour ne pas dire rien !
Regarde ici:
http://www.chezarmony.ch/doll/tut/print.jpg
C'est la touche d'impression ecran qui te permet de faire une photo de ton ecran, donc fait cette touvhe lorsque tu est sur l'onglet mainboard, puis fait coller sur paint par exemple, et fais de meme sur l'onglet SPD
Heberge ces deux fichiers sur https://www.dedikam.com
Regarde ici:
http://www.chezarmony.ch/doll/tut/print.jpg
C'est la touche d'impression ecran qui te permet de faire une photo de ton ecran, donc fait cette touvhe lorsque tu est sur l'onglet mainboard, puis fait coller sur paint par exemple, et fais de meme sur l'onglet SPD
Heberge ces deux fichiers sur https://www.dedikam.com
Désolée je ne parviens pas à faire ce que tu me demandes alors je vais écrire :
Pour Mainboard :
Model FCGM - Chipset NVIDIA - gEfORCE 6100 -Rev. A2
Southbridge NVIDIA - nForce 410/430 MCP
LPCIO - ITE - IT8712
BIOS Brand - Phoenix Technologies, LTD
Version R01-A4S2
Date 12/26/2005
Pour SPD :
Slot #1 DDR
Module Size 512 Mbytes Correction None
Max Bandwidth PC3200 (200 Mhz) Registered No
Manufacturer Nanya Technology Buffered No
ParHCt Number MU
DSG-T
Serial number 65B42C01 Week/Year 82/05
Timings Table
Frequency 166 Mhz 200 MHz
Cas#Latency 2.5 3.0
RAS#To CAS# 3 3
RAS# Precharge 3 3
tRAS 7 8
Voltage 2.5 V 2.5 V
Et tout entre 2 coupes sur mes orangers au jardin, il faut en avoir envie.
Merci de ta patiencce
Pour Mainboard :
Model FCGM - Chipset NVIDIA - gEfORCE 6100 -Rev. A2
Southbridge NVIDIA - nForce 410/430 MCP
LPCIO - ITE - IT8712
BIOS Brand - Phoenix Technologies, LTD
Version R01-A4S2
Date 12/26/2005
Pour SPD :
Slot #1 DDR
Module Size 512 Mbytes Correction None
Max Bandwidth PC3200 (200 Mhz) Registered No
Manufacturer Nanya Technology Buffered No
ParHCt Number MU
DSG-T
Serial number 65B42C01 Week/Year 82/05
Timings Table
Frequency 166 Mhz 200 MHz
Cas#Latency 2.5 3.0
RAS#To CAS# 3 3
RAS# Precharge 3 3
tRAS 7 8
Voltage 2.5 V 2.5 V
Et tout entre 2 coupes sur mes orangers au jardin, il faut en avoir envie.
Merci de ta patiencce
Alors:
Encore dans l'onglet SPD: dans la liste deroulante de SLOT#1, combien a tu de choix ?
Dans la ligne MAX BANDWIDTH, qu'est il ecrit ?
Par exemple tu peut avoir PC5300, PC6400.....
Encore dans l'onglet SPD: dans la liste deroulante de SLOT#1, combien a tu de choix ?
Dans la ligne MAX BANDWIDTH, qu'est il ecrit ?
Par exemple tu peut avoir PC5300, PC6400.....
Donc auparavant tu m'as dit que tu a de la DDR, prend:
https://www.materiel.net/
https://www.materiel.net/
Bonjour bogosstar42, et bien voilà j'ai commandé là où tu m'as conseillée, j'ai même eu une remise, ce matin la mamie a laissé son jardin, il pleut et j'ai installée la barre de mémoire. Tout marche à merveille, je n'ai pas encore évalué le mieux, mais ma petite faisant des jeux elle y verra. Encore merci et bonne fin de journée.
Type ordi : AT/AT COMPATIBLE
Version du BIOS système ASUS 30303031
Processeur x86 Family 6 Model 6 Stepping 2
Mémoire physique 256 Mo
Puis tout le résumé carte mémoire si tu en as besoin.
Mais ne t'énerves pas, je veux bien télécharger CPU-Z onglet mainboard
Au prochain épisode