HDMI/PS3 Connection Issue Closed

Question

Hello,

I recently acquired a PS3 and I want to connect it to my HD Ready TV using an HDMI cable. So, I bought a standard HDMI cable for that, but I can't connect my console.
No matter how much I go into the display settings to adjust the HDMI connection, nothing happens.
On the HDMI channel of my TV, there is no signal; the screen is black with only the inscription 576p.
I tried restarting it with only the HDMI cable to force the PS3 into HD mode, but nothing works.
I really need your help.
Thank you for all your responses.

P.S: My TV is a 19-inch Polaroid HD Ready.

Configuration: Windows XP Internet Explorer 7.0

anto · Accepted Answer

Me neither, it didn't work, but thanks to me, I found the solution: turn off the PS3, then connect only the HDMI cable to the console and the TV, then turn on the TV and the PS3, then reconnect the SCART cable and switch to AV, then a message comes up saying that the HDMI cable has been detected, then accept the message, and it just worked for me.

Lannes · Answer

Hello,

I had the same problem with my PS3 that I bought three weeks ago and was working perfectly via HDMI until yesterday.

I had no image or sound, and my HDMI port was also displaying 560p.

I tried several manipulations, including resetting the console settings and connecting via the SCART, but without success...

Disheartened, I turned off the console and the TV and went to bed.

However, this morning I decided to power on the TV and console again, turning on the TV first and then starting the console.

And suddenly, the HDMI port was finally recognized by the console. I clicked OK for the HDMI connection and the image finally appeared...

I don't have a real explanation, but I think that resetting the console settings and then turning everything off, followed by powering on the TV first and then the console, might be a solution.

In any case, it worked for me.

mouze59 · Answer

Hi everyone

I also had a little problem with my connection; I only had sound, so I went back to the basic cable and modified the display settings on the PS3 (in the menu settings => display)

Connect both cables, the regular one and the HDMI
It will ask you to choose which type of connection you want, then it will offer to change the output
It will wait for your response: go to the HDMI position on the TV, and if you have a response, then reply; otherwise, the console will revert to the initial output after 30 seconds

You can then remove the appropriate cable

I hope my solution can help someone @ ++

vans · Answer

Hello everyone

I have a little problem. I had a classic connection, and then I spent two months at my friend's place, so I connected it via HDMI, which was pretty good. But now that I’m back home with my classic connection, nothing's working anymore. I can't get a picture, and I don’t know what to do. Thank you for helping me.

patator · Answer

To talk about my little experience, I've often had surprise black screens on my PS3, even though it was working perfectly the day before, and I couldn't understand why. Then by chance, I turned it back on and it worked. Today, surprise black screen... Big anger at first... reset the settings, switched to SCART, cable detected, switched to HDMI, and still a black screen... Just like always. Then I turned off the TV (not on standby, off or unplugged), turned it back on, and there it works. I think that's what I've done every time without knowing it, just trying...

jess · Answer

To connect the HDMI cable, you need to turn on the PS3, connect the HDMI cable and the original cable, set the TV to AV HDMI, and then it will ask you if you want to enable the HDMI function, etc. Answer the question; there's no need to restart the console. Good luck!

didou · Answer

thank you all for your advice

HDMI/PS3 Connection Issue

7 réponses

Texture issues in enshrouded

Announcement: online source code archive

Pc that doesn't run normally

Keyboard issue with the "alt gr" key

End of the movie room 1408

Pc startup black screen white dash blinking

Edit mp3 file properties

Freebox telephony no dial tone

Pc won't start - pxe issue (e61 and m0f)

I would like to change the date on my digitec watch.