Erreur de parité PCI sur bus/dispositif/fonction ...
axel
-
dstevevai -
dstevevai -
Hello,
for several weeks now, my laptop won't start... During startup, during the BIOS initialization, it gives me messages "pci parity error on bus/8device/function" at addresses 0000h 0030h 0040h 0060h 0070h 0071h.
However, sometimes it does manage to start despite everything, but then it shuts down by itself after a random amount of time...
The error messages are different sometimes; apparently, there is a conflict between the hard drive and the network card regarding IRQ address?
How can I fix this problem? I haven't found anything in my BIOS to configure the IRQs, I tried resetting the BIOS to zero but the problem persists, what should I do? I was thinking about removing the motherboard battery; is that wise?
for several weeks now, my laptop won't start... During startup, during the BIOS initialization, it gives me messages "pci parity error on bus/8device/function" at addresses 0000h 0030h 0040h 0060h 0070h 0071h.
However, sometimes it does manage to start despite everything, but then it shuts down by itself after a random amount of time...
The error messages are different sometimes; apparently, there is a conflict between the hard drive and the network card regarding IRQ address?
How can I fix this problem? I haven't found anything in my BIOS to configure the IRQs, I tried resetting the BIOS to zero but the problem persists, what should I do? I was thinking about removing the motherboard battery; is that wise?
4 answers
-
Good evening,
reinstalling Windows, I'm having doubts... I'm already using Linux, but above all, I think the problem lies in the BIOS configuration, since it crashes at startup, during the peripheral test. However, my BIOS is so simplified that I can't configure much... Would reinstalling my system reset the motherboard configuration in your opinion?
I don't know what to do, thank you for your help... -
-
I have a friend whose phone keeps shutting down by itself. He gave me his phone because it overheats a lot. I cleaned the ventilation grill of the processor and now it works fine. However, I have a conflict under BIOS: PCI bus 2 device 9 function 2, 3, and 4, and I can't install the PCI controller driver under Windows. I'm starting to lose hope: does anyone think that the heat could have damaged something?
-