SMTP configuration with SFR

New SFR customers, old Tele2...

For an Outlook 5 and 6 setup, go to the "server" tab pop.sfr.fr smtp.tele2.fr account name :...@sfr.fr password :******

My server requires authentication... In the settings, you set the same ones as those of Tele2.

In the "connection" tab = local network (for those with Ethernet)

Then the "advanced" tab = outgoing (smtp) |587| =} from Tele2

I think I've explained everything, I spent a long time figuring this out!

@+ and good luck to everyone...

A practical guide on the addresses of the POP/SMTP servers of the main ISPs.

Thank you for all this information, especially the port, the name of the SMTP server, and the format of the identifier, for which I would never have thought to put anything else if I had only relied on SFR's support documentation. Now, everything works thanks to you :-)

Hello,

Try: smtp-auth.sfr.fr

However, I have a problem receiving my emails. I tried for POP3: POP.sfr.fr and I'm not receiving my messages.
If anyone knows the solution.

Thank you in advance.

Jean Didier

Hello,

I can send emails without any problem from my SFR mailbox using FoxMail with the SMTP server mail.sfr.net and port 25.
But I am unable to receive any... Could you give me the solution?
Thank you in advance.
Lou

Hello everyone,

I am with SFR formerly Club and I couldn't send my emails through Windows Mail.

If you are in the same situation, I recommend WOLF's solution: set the port to 587 and it works like a charm.

Thanks WOLF, I had been struggling with SFR's hotline for a long time.

Brune

Hello,

I finally found the solution to set up Windows Mail.

Pop.sfr.fr
Smtp-auth.sfr.fr

In SFR Messaging, you need to click on "Preferences"
Then click on "Pop"
Activate the POP protocol for messages
Go to "To automatically configure the email client click here" and just follow the instructions.

I hope this works for you.

Hello everyone.
So personally, I've followed the instructions well - thanks again for the info - ... but it's not working.
Let me explain, I’m a former Tele 2 switching to SFR - forced to.
I'm on Mac OSX 10.5.6 and I want to set up a mailbox on Mail - anyway, like everyone else :)
So here are the details I've entered:

Account type: POP
Description: SFR
Email address: xxxxxx@sfr.fr
Full name: xxxxxx@sfr.fr

Incoming server: pop.sfr.fr
Username: xxxxxx@sfr.fr
Password: xxxxxxxx

Outgoing server (SMTP): smtp.sfr.fr

I think I'm doing everything right but ... I'm not receiving any messages!

PS: I'm abroad, so I'm on a different internet connection, but well ... I don’t think that should matter ...

Thanks for your help, I can't take it anymore!

Activate the POP protocol on the SFR mail server with a password, the same as when it was created.

Configure your email account on your PC,
pop.sfr.fr
smtp-auth.sfr.fr
Username: xxxxxx@sfr.fr
password: xxxxxxxx
SMTP Port 587
Check the box "My outgoing server (SMTP) requires authentication."
Select "Use the same settings as my incoming mail server."

That's it

pop3.sfr.fr

If someone has a problem transferring their SFR emails to Outlook:

My wife just created an address on SFR. We are originally Neuf customers. Be careful with the settings on Outlook:
pop.neuf.fr
smtp.sfr.fr

There you go, if this can help others.

Mauricos

Hi, try 25
That's all I found.

/@@\

you just need to enter your address .....@sfr.fr and your password best regards

In principle, it's 25 for the SMTP port but I haven't been able to since I switched from Vista to Windows XP
Good luck