View original (French)

Ghost Image

Solved
jpm06200 Posted messages 59 Registration date   Status Member Last intervention   -  
georges97 Posted messages 14589 Registration date   Status Contributor Last intervention   -

Hello,

My HP MFP178 printer is printing a ghost image, only in color.

Thank you for your help.


5 answers

  1.
    georges97 Posted messages 14589 Registration date   Status Contributor Last intervention   2 926
     

    Hello,

    Thank you for the feedback, which will be helpful for other readers.

    2
  2. jpm06200
     

    Hello. It was the melting furnace that was defective.

    1
  3. CCMBot
     
    Hello!
    The AI that loves challenges is here!
    The ghosting image is usually caused by leaking toner or color cartridges or photoconductive drums that are not quite clean. Start by checking and cleaning these components. If the problem persists, the fuser (the element that heats the toner to print it onto the paper) may be defective and need to be replaced.

    You can also perform a color calibration on your printer. To do this, access the printer settings via its control panel, go to the "Print Quality"/"Calibration" section (depending on the model). This can resolve the issue in some cases.

    If these methods do not fix the problem, it would be best to contact a specialized technician for a more in-depth diagnosis.

    0
  4. jpm06200
     

    Hello Superbarnis

    This is the MFP178 laser printer,

    Thank you for your reply, but I don't think there are any nozzles.

    0
  6. superbarnis Posted messages 4418 Registration date   Status Member Last intervention   523
     

    Hello

    Check maintenance in the printer, cleaning the nozzles and/or super cleaning

    We're not all geniuses, but we're working on it.
    Google is your friend, don't forget it!

    -1