View original (French)

Canon Pixma MG 5150 Printer Drivers

Solved
fred -  
jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   -

Hello, I am looking for the complete program for Canon Pixma MG 5150. Thank you.

4 answers

  1.
    jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508
     

    Hello .....

    If there is a problem from the Canon site, I suggest you try doing as indicated below

    ✅Open the Windows 10 control panel

    ✅Click on Devices and Printers

    ✅Click on Add a printer (2nd line at the top right)

    ✅Click on The desired printer is not listed

    ✅Check the last small box at the bottom then ▶️ Next Leave the top box checked ▶️ Next

    ✅Click on Windows Update ▶️ Let the machine search for compatible printers ...Note that this may take a few minutes depending on the load on the Microsoft server

    ✅In the window that opens ▶️ Left column scroll down to find the brand Canon

    ✅Highlight the printer Canon MG 5150 Series in the right column

    ✅Next to start the printer installation and follow the installation process

    ✳️See screen image below

    Good luck with the result obtained

    Cheers

    1
    1. fred
       

      nothing to be done, it is not recognized by the computer

      0
      1. jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508 > fred
         

        Has it ever been installed on this same PC?

        Did you buy it new or second-hand recently?

        I suggest you perform a clean and complete uninstallation of this printer to remove all previous attempts using Revo Uninstaller ► Here

        If you are not familiar with this tool, take the time to read about how it works at the same link..

        Run the uninstallation to completion ► Restart the PC and make another attempt by following the instructions in my last message

        See you for the results

        0
      2. fred > fred
         

        Hello again, we checked the Canon website and it is only compatible with Windows 8, Windows 7, Windows XP, and Windows Vista.

        0
      3. jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508 > fred
         

        That's why I suggested that if it didn't work through the Canon link, to install it from the Windows 10 control panel because it should recognize this printer thanks to its built-in driver.

        See you!

        0
  2. jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508
     

    Hello....

    Everything is ► Here my friend....!

    However, if you are on Windows 11, you may encounter difficulties as Canon doesn't seem to provide a driver for this OS

    Cheers ► A+

    0
    1. fred
       

      Hello, I can scan photos but I don't know how to print via the computer. Thank you.

      0
  3. fred
     

      yes sorry for Windows 10 thanks

    0
    1. jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508
       

      Thank you for the feedback

      In principle, it's fine with the link I sent you above..

      See you for the result obtained

      Regards

      0
      1. fred > jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention  
         

        Hello, I installed the application but it doesn't want to recognize the printer. I removed the cable and put it back as they said, but it doesn't work.

        0
      2. jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508 > fred
         

        Do you have a message or anything else

        See you+

        0
  4. fred
     

    Hello a big thank you to everyone it works thank you very much

    0
    1. jmarion3 Posted messages 49489 Registration date   Status Contributor Last intervention   5 508
       

      Hello Fred... and thank you for the feedback

      I thought it was alright ► Glad for you if everything is working

      I mark the topic as resolved...

      Best regards

      0