Connection issue with my WLR-755 AC WiFi extender

Atlas -  
brupala Posted messages 111154 Registration date   Status Member Last intervention   -
Hello,

I have a problem with my Maginon WLR-755 AC Wi-Fi repeater; I can't access the page to enter my box's credentials to get Wi-Fi. Thank you in advance.

5 answers

  1. jeannets Posted messages 28404 Registration date   Status Contributor Last intervention   Ambassadeur 6 604
     
    Hello,

    It would be interesting to know the model of your BOX, first of all...

    To access your BOX, you need to type the IP address of your BOX in the URL address (it's often 192.168.1.1 except for Free) in your browser, then the password... But not from a Wi-Fi repeater... it might work, but depending on your setup, it’s not a certainty...
    Some providers do not allow connecting via Wi-Fi to access the BOX, but only through an Ethernet line...

    Then, your repeater should have an IP address... But if it's a true repeater, it is an exact copy of the BOX, if it has been properly configured for that from the start... so it should work...

    Normally you should have a manual with this repeater--- and you can reset it... and start from scratch, just like on the day it was set up...

    All the information is there https://downloads.maginon.de/en/download/wifi-amplifier-wlr-755-ac/

    Has this repeater been working for a long time?? Or is it brand new?? And it hasn't worked yet??
    0
  2. Atlas
     
    Rebonjour, merci pour les informations et désolé de ne pas avoir été plus précis. Pour information, cela va faire un an que je l’ai, je pense, et il marchait très bien, mais depuis hier, plus de connexion sur mon PC. Du coup, j’essaie de mettre l’adresse IP qu’ils disent de renseigner dans la notice, mais rien n'y fait, ça ne veut pas m’afficher la page de connexion au routeur. Rien du tout, donc je viens vers vous.
    0
  3. brupala Posted messages 111154 Registration date   Status Member Last intervention   14 451
     
    Hi,
    it would be a good idea to factory reset the thing and reinstall it like it was at the beginning.

    --
    and... there you go!
    0
  4. jeannets Posted messages 28404 Registration date   Status Contributor Last intervention   Ambassadeur 6 604
     
    You only answer one question... yet there are many others. You say "put in the IP address"... OK, but which one...? Give some numbers...
    Your Internet provider..? The brand and model of your router..?

    You can already unplug the wall sockets (Router...Repeater...PC)... for 20 minutes and then reconnect everything. The Router first, the repeater next... Then your PC.

    Haven't you installed any new Wifi or Bluetooth gadgets at home that may coincide with the date...? Even your neighbors...?
    0
  5. Atlas
     
    So I already tried to reset it to factory settings, then I attempt to connect with the ilo they gave me, so 192.168.10.1 my IP is mine so Mas box knowing that I am with SFR I believe that it is 93.4.239.38 but I also tried to put it but that doesn't work either and the model is the NB6V.
    0
    1. brupala Posted messages 111154 Registration date   Status Member Last intervention   14 451
       
      Forget your box, we're talking about that thing there...
      Also,
      if you could make an effort to write correct French sentences...
      it would save me the attempts with my decoder.
      0