View original (French)

Unable to print from LibreCAD

jmlouvet Posted messages 8 Status Member -  
 Jmlouvet -
Hello,

I’m having printing problems. I managed to get a few out at the beginning, and since then the drawings displayed in the preview appear fine, but when printing it’s blank pages, including in PDF format.

Configuration: Windows / Firefox 100.0

9 answers

  1.
    contrariness Posted messages 17903 Registration date   Status Member Last intervention   6 243
     
    What thickness value did you give to your traces? ... wouldn’t you be too thin for the scale?
    0
  2. jmlouvet Posted messages 8 Status Member
     
    Good evening, thank you for your suggestion
    I redid some tests by changing the stroke thickness, even with a thickness of 2 there are no traces left on the print
    0
  3. contrariness Posted messages 17903 Registration date   Status Member Last intervention   6 243
     
    Did it happen all of a sudden?
    I would be curious to see the result of a PDF file... Could you upload one on Cjoint.com?
    0
  4. jmlouvet Posted messages 8 Status Member
     
    I’m trying to transfer the file with cjoint but apparently it’s getting stuck.
    I’ll also post a screenshot of LIBRECAD if I manage to get the links.
    Thank you for your response
    Have a nice day
    0
  6. jmlouvet Posted messages 8 Status Member
     
    It seems the attachment is stuck; could you tell me another way to share a file?
    Thank you
    0
  8. jmlouvet Posted messages 8 Status Member
     
    Good evening
    indeed it exports to PDF.
    I’m going to focus on the layers.
    Thank you very much
    0
  9. jmlouvet Posted messages 8 Status Member
     
    When I import a copy-paste of the whole drawing, it saves as a PDF. I must have checked a wrong box
    thanks again
    0
    1. contrariness Posted messages 17903 Registration date   Status Member Last intervention   6 243
       
      Optionally, without closing the window in LibreCAD, open a new document and copy/paste the previous one into the new window.
      You can switch windows in the "drawings" menu.
      0
  10. Jmlouvet
     
    Okay, thanks, I’ll eventually find the right configuration compared to the one that’s blocking me on this drawing.
    Thanks again for your help
    0