View original (French)

Enable CPU Turbo on a PC

Solved
Anonymous user -  
 Anonymous user -
Hello,

Sometimes my PC is slow, can I manually activate my processor's turbo to suddenly increase my PC's speed?

Thank you for your reply.

1 answer

  1.
    Panth33ra Posted messages 23148 Registration date   Status Member Last intervention   Ambassadeur 2 360
     
    Hello,
    Have you increased your RAM as jfmimi advised, whom I greet by the way [message #5]... https://forums.commentcamarche.net/forum/affich-37482910-puis-je-augmenter-ma-ram

    --
    ASUS ROG G752 VSK | QuadCore Intel i7 7700HQ | 32 GB-DDR4 | 2 SSD M.2 500 GB | 2 Seagate 2TB HDD | GeForce GTX 1070M 8 GB | 17.3" Screen (120 Hz) | DirectX 12 | Windows 10 (x64)
    0
    1. Anonymous user
       
      No, not yet because I thought about this question, which could have been addressed more quickly.
      0
      1. Panth33ra Posted messages 23148 Registration date   Status Member Last intervention   2 360 > Anonymous user
         
        Since your PC is slow, upgrade your RAM sticks. The rest is secondary.
        0
      2. Anonymous user > Panth33ra Posted messages 23148 Registration date   Status Member Last intervention  
         
        So there is no method regarding the turbo?
        0
      3. jfmimi Posted messages 13734 Registration date   Status Contributor Last intervention   1 929 > Anonymous user
         
        Hello
        the CPU turbo mode is automatic and activates as needed
        To perform a PC diagnosis:
        Download FRST 64
        The SmartScreen filter may trigger an alert. Click on Actions or More Info and then on Run anyway
        Close all applications, including the browser
        launch the program FRST.exe
        you need to launch it by right-clicking -> Run as administrator
        Wait until it indicates The tool is ready to use
        Click on the " Scan ". button
        Wait for the scan to finish, a message will indicate that the analysis is complete.
        at the end of the scan, the reports " FRST.txt " and "Addition.txt " are created.
        The reports are saved in the same location as the software " FRST 64 "
        The principle is simple, you send each of the reports: Here
        Each time a link to these reports will be provided to you.
        In return, give both links so that we can read the reports
        To do this, simply right-click on the link provided by pjjoint and “Copy link address”.
        Then right-click and paste the links into your next message.
        1
      4. Anonymous user > jfmimi Posted messages 13734 Registration date   Status Contributor Last intervention  
         
        Oh, I see, it’s automatic, thank you for the software!
        0