View original (French)

Scan des réseaux sans fil est désactivé sur atlas 200

Mike64 -  
 Atlas -
Hello,

I am unable to scan for Wi-Fi on my Atlas 200.
Normally, you need to press the green button to scan, but this button is not allowed to be used.

How can I resolve this issue?

Atlas 200 version F405

3 answers

  1.
    jeannets Posted messages 28443 Registration date   Status Contributor Last intervention   Ambassador 6 615
     
    Hello,

    If the Wi-Fi is active, it means there is no Wi-Fi within range...

    Check with a smartphone which Wi-Fi networks are accessible in this area..?

    Are you sure you have an internet box that broadcasts Wi-Fi in your house..??
    0
    1. Mike64
       
      The wifi is enabled

      The problem is that I cannot search for a network
      The green button and the red button do not even appear on the network interface settings screen
      0
  2. jeannets Posted messages 28443 Registration date   Status Contributor Last intervention   Ambassador 6 615
     
    yes, but as I said, if there is no network in the neighborhood, it's normal.

    You did not answer my questions from POST 1

    At the very least, you can restart your Atlas 200 by unplugging it for 5 minutes. I said unplug it, not turn it off with the button.

    Place it 1 meter from the BOX and restart... what wifi does it receive?
    If I understand correctly, it has never worked?
    0
    1. Mike64
       
      Yes, there is indeed Wi-Fi because I am using my smartphone via Wi-Fi.

      I just tested the three types of available WLAN, each time with 5 minutes without power, but unfortunately, the green Wi-Fi search button is still not available.
      0
    2. Atlas
       

      Thank you

      0
  3. jeannets Posted messages 28443 Registration date   Status Contributor Last intervention   Ambassador 6 615
     
    It doesn't prove that the two devices are on the same Wi-Fi..? Check the Wi-Fi names.

    And if you connect via Ethernet RJ45 directly behind your BOX... it should work.
    Give it a try.. even if you have to lay a cable on the floor, it's only for 5 minutes, just for testing. What's the model of your BOX..?

    Has this Atlas 200 ever worked at your place..?
    0