View original (French)

Atlas HD 200S Receiver Setup

aziz le havre -  
 jusdex59 -
Hello, my question is the following: I can't adjust my Atlas receiver. I managed to get the signal, but no picture. Concerning the LNB, it's a dual LNB with a single output (monobloc).
Thank you for providing me with some tips to get the picture.

Configuration: Windows 8 / Chrome 48.0.2564.116

1 réponse

Réponse 1 / 1
jusdex59
 
Hello, have you set your antenna correctly with the right DiseqC 1.1 and configured the twin function in your decoder settings?
5