View original (French)

DTV Mode on Nasco

Solved
DesKoff_1788 Posted messages 5 Status Member -  
Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   -
Hello everyone.
I apologize if my question does not fit the chosen category.
Actually, I have a 32-inch Nasco television. For a while now, it switches to DTV mode with just a small manipulation. Even if I press a button twice, it goes into DTV mode. The worst part is that in such a case, the source button, which should allow me to switch modes, doesn’t work, and after a while, it magically starts working again (after 24 hours, 48 hours, or several hours) when I press the source button. It really frustrates me.
Thank you for your help.

5 answers

  1.
    Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    Hello and welcome to this forum,

    Try to do a "reset" or "factory reset" or "initial setup" (see menu) but you will have to redo the entire installation and settings.

    --
    I call a spade a spade *
    *in French in the text
    0
    1. DesKoff_1788 Posted messages 5 Status Member
       
      Thank you very much. But as I mentioned, the remote control hardly works anymore. Only the volume down button reacts properly. For the other buttons, I can feel that they work, but there's no effect. So I will have the same difficulties with a reset.
      Thank you.
      0
  2. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    You're welcome, and feel free to come back with updates or if you have any other questions. You have no other choice but to get an original remote if possible, otherwise a universal one, provided you check the compatibility with your TV.

    --
    I call a cat a cat *
         *in French in the text
    0
    1. DesKoff_1788 Posted messages 5 Status Member
       
      It's the remote control for the TV itself, the original one. I really don't understand anything anymore.
      0
  3. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    Your remote control may be defective,
    See this tutorial:
    https://www.youtube.com/watch?v=XVt0cPeyXzk

    I call a spade a spade *
         *in French in the text
    0
    1. DesKoff_1788 Posted messages 5 Status Member
       
      Alright, thank you very much. I see, and if necessary, I will purchase a new one.
      Thank you very much already for the support.
      0
  4. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    ;-) and come back to give some news

    --
    I call a spade a spade *
         *in French in the text
    0
    1. DesKoff_1788 Posted messages 5 Status Member
       
      Yes, I just wrote the text. I notice a red light emitted by the remote control when I press a button. But this light quickly fades.
      0
  6. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    And have you changed the batteries?

    --
    I call a spade a spade *
    *in French in the text
    0