How to set up my Epson XP 2100 printer

Hello billmaxime, hi to you.
@+

Is there a "Head Cleaning" button and another "Paper Feed" button on the printer panel?
Maybe you should try this!
Turn off the printer, unplug the power cord from the wall outlet, unplug the USB cable from the printer.
Wait 1 minute, then plug the power cord back into the wall outlet. Do not plug the USB cable back in.
Press and hold the "Head Cleaning" and "Paper Feed" buttons simultaneously.
Without releasing these buttons, turn on the printer. After two flickers, all indicator lights will turn on, release the buttons.
Press the "Head Cleaning" button for 10 seconds.
Release the "Head Cleaning" button, the printer will initialize and is supposed to reset the ink cartridge print counter.
Once the initialization is complete, turn off the printer.
Reconnect the USB cable.
Turn on the printer and start a print.
It’s possible that the Head Cleaning button is ►Roll button.
@+

Did it work?

You can also buy a small box that resets the Epson chips, I can't remember what it's called, basically you plug it into the cartridge at the chip level and wait for the light to indicate that the step is complete. I haven't bought it yet, so I have no info on its effectiveness, but I did buy the refillable cartridge kit that is supposed to have a chip that resets every time we refill the cartridge on AliExpress for 30 euros for 4 colors and 4*100 ml of ink, anyway it's not wasted, I can always order chips but that wasn't what was written on the order paper, so like many, I'm looking for a way to reset these damn chips!! If you're really interested, comment on this post and I can try to buy this little box that resets the chip, I'll post a response on its effectiveness :)

PS: In the meantime, I bought 2 official XXL cartridges for 8 euros on Le Bon Coin, it's dead, I will never buy cartridges at the prices they sell them!