View original (French)

Mixing console connections

AkR0 Posted messages 3 Status Member -  
piquesous Posted messages 15734 Registration date   Status Contributor Last intervention   -
Hello, I would like to buy a CL115 MK2 subwoofer (with CL112 top MK2 satellites, photo attached) all connected to a Behringer Xenyx 802 mixer (because I have an Electribe and a controller), but
in terms of connectivity, it’s not my strong suit. Can someone advise me on how to connect my subwoofer to my mixer, please? Thank you in advance



1 answer

Answer 1 / 1
piquesous Posted messages 15734 Registration date   Status Contributor Last intervention   6 123
 
Hello,

The SUB doesn’t change much in terms of connections, because, from the console output, you go to the SUB, and then from the SUB to the speakers.

See you later

--
_____________________________________________________
Brakes are for cowards! But anyone who doesn’t brake is an idiot........
0
AkR0 Posted messages 3 Status Member
 
But personally, it's the sub at the table that causes me problems, the sub at the head is fine for the connections.
0
piquesous Posted messages 15734 Registration date   Status Contributor Last intervention   6 123 > AkR0 Posted messages 3 Status Member
 
What is needed is either:
- two cables with 6.3 jack plugs at each end
- two cables with 6.3 jack plugs on one side and XLR plugs on the other side that will go to the INPUT terminals on the subwoofer.
0
AkR0 Posted messages 3 Status Member > piquesous Posted messages 15734 Registration date   Status Contributor Last intervention  
 
Thank you ;)
0
piquesous Posted messages 15734 Registration date   Status Contributor Last intervention   6 123 > AkR0 Posted messages 3 Status Member
 
Oops, sorry, I just realized there's a mistake.
It’s not 3.5 cards, but 6.3.
0