View original (French)

How to connect a mixer to an amplifier

valp38660 Posted messages 11 Status Membre -  
valp38660 Posted messages 11 Status Membre -
Hey, hi, I'm asking you this question that might seem stupid but I know zero about this field, so here’s my problem. I have a Behringer XENYX 802 mixing console and a STA700 amplifier, and I would like to know which cable I need to connect one to the other (a link if possible, as I don't know where to buy it). I understood that for the connection of the console, it goes through the two ports marked "main out" above, so I would like (link to the console: https://www.amazon.fr/Behringer-802-Egaliseur-tri-bande-Entr%C3%A9es/dp/B000J5XS3C and photo of the back of the amp: https://fr.audiofanzine.com/ampli-sono-2-canaux/img-stage-line/STA-700/medias/photos/#id:271410)

So, thank you in advance for your answers.

2 réponses

Réponse 1 / 2
Judge_DT Posted messages 644 Registration date   Status Modérateur Last intervention   10 013
 
Hello,

You need two male-male 6.35mm jack cables, one for the left channel and the other for the right channel, running from "MAIN OUT L & R" to "INPUT L & R" on the amplifier.

--
~ To know how to listen is to possess, besides one's own, the minds of others... said Leonardo da Vinci.
11
valp38660 Posted messages 11 Status Membre
 
okok thanks for getting back to me so quickly! :)
0
valp38660 Posted messages 11 Status Membre
 
Oh, and I wanted to know one last thing, does this kind of cable not work?
https://www.amazon.fr/Adam-Hall-Cables-K3TPC0300-longueur/dp/B006H0E33C/ref=pd_sim_267_7?ie=UTF8&psc=1&refRID=5R18XY8HM0FVBW963HC6
0