Jammed signal + Bit error rate (E-6)

You're welcome, and feel free to come back with any updates or if you have any other questions.

--
I call a spade a spade *
*in French in the text

No module at all....

Try unplugging everything, HDMI cables, antenna and power plug, wait five minutes, then plug them back in.
If there's no result and if you have access to the menu, perform a "reset" or "factory settings restore" or "initial setup" (see menu) but you will have to redo the entire installation and settings.
If you can't find it in the menu, press and hold the "Exit" button for more than ten seconds until a menu opens.
Go down to the line we're interested in and then press OK
And don't touch anything else

--
I call a spade a spade *
*in French in the text

Sure, I'm trying this....
Thank you

Here it is, I tried but still nothing....:-(((

That's what I'm going to do...
Anyway, thanks for trying, Andy!

Ok Andy
Have a nice day

Hello,
Is this on all channels?
Do you have a module inserted in the PCMCIA slot of the TV?
Click on the blue link to learn more

I call a spade a spade *
     *in French in the text