Philips CD440
Solved
espal
-
baladur13 Posted messages 47296 Registration date Status Moderator Last intervention -
baladur13 Posted messages 47296 Registration date Status Moderator Last intervention -
Désolé, je ne peux pas vous aider avec cela.
11 answers
Yesterday I saw this antenna flashing but today, nothing!
Yes, the base is connected to my live box.
There is indeed a button on the base: I pressed it for a while as I had read somewhere. Nothing happens. Thank you for your patience!
Yes, the base is connected to my live box.
There is indeed a button on the base: I pressed it for a while as I had read somewhere. Nothing happens. Thank you for your patience!
A short press should make the handset ring, but for that the radio link between the base and the handset needs to be functioning.
A long press is to subscribe (request pairing) with the handset.
So this is the procedure we are going to try to carry out;
See the manual on page 23 (25 of the pdf below) paragraph
5.7.6 Subscribe an additional handset
The manual: https://download.p4c.philips.com/files/c/cd4402s_24/cd4402s_24_dfu_fra.pdf
A long press is to subscribe (request pairing) with the handset.
So this is the procedure we are going to try to carry out;
See the manual on page 23 (25 of the pdf below) paragraph
5.7.6 Subscribe an additional handset
The manual: https://download.p4c.philips.com/files/c/cd4402s_24/cd4402s_24_dfu_fra.pdf
I went through the procedure again, I changed the power cable of the base... No beeping. The screen displays "in progress" and then goes back to "SEARCH". Is it hopeless?
The device that was previously connected worked fine. I changed it because this one has more functions.
The device that was previously connected worked fine. I changed it because this one has more functions.
The base is the one that is sick...
What device did you have before?
It is possible to subscribe to the Philips handset with the base of the old phone...
I'm not sure it will provide all the features of the Philips handset because I don't know which one controls the functions (base or handset), but it's worth a shot...
The subscription procedure is the same except that you need to press on the base of the old phone at the end.
Then the Philips base will only serve as a charger.
What device did you have before?
It is possible to subscribe to the Philips handset with the base of the old phone...
I'm not sure it will provide all the features of the Philips handset because I don't know which one controls the functions (base or handset), but it's worth a shot...
The subscription procedure is the same except that you need to press on the base of the old phone at the end.
Then the Philips base will only serve as a charger.
Not possible to put the other base: the handset does not fit.
I believe that with your help I have tried everything... What a shame!
But.....big THANK YOU!
I believe that with your help I have tried everything... What a shame!
But.....big THANK YOU!
Oh dear! It's getting complicated for me! I'm thinking it over, processing it all, and I'll update you tomorrow...
It’s simple.
You connect your old base to the box and power it on.
You follow the procedure on the Philips handset as described on page 23.
This continues until step 5 where you need to enter the PIN code (0000)
but instead of performing step 6
Press the button on the base for 3 seconds until you hear a beep. on the Philips base, you do the same on your old base, which also has the same button.
You connect your old base to the box and power it on.
You follow the procedure on the Philips handset as described on page 23.
This continues until step 5 where you need to enter the PIN code (0000)
but instead of performing step 6
Press the button on the base for 3 seconds until you hear a beep. on the Philips base, you do the same on your old base, which also has the same button.
Hello! Thank you for your patience! I can't see that this morning. I will try again later in the afternoon. See you soon then!