View original (French)

Philips CD150 subscription

Solved/Closed
jo972 -  
 al_leo -
Hello,
I bought a Philips CD150 phone, and it keeps flashing "search" on the screen. I reset it, but nothing works. What should I do, please?
Configuration: Windows XP Firefox 2.0.0.14

23 answers

  • 1
  • 2
Answer 1 / 23
bintou
 
You have two boxes. There is a large box and a small one. On the large box, there is a button, which is located on the part where you place your phone; that's the base. Press and hold this button for 7 seconds, then take your phone.
*press the MENU button
*go to ADVANCED SETTINGS
*go to SUBSCRIPTION
*enter the code 0000
*then click OK
it should be good now.
49
Kissou Cosby
 
I did it and it works!!!!!!!!! Thank you very much!!!!!!!!!
0
PIERRE
 
It works, thank you Pierre.
0
mpix
 
I just wanted to add that you need to press the base button and hold it down while you perform the操作 on the additional handset.
0
KTR932
 
Merci beaucoup, ça m'a beaucoup servi, je suis content !!! =)=)
0
c moi
 
I tried to do the same thing but with my phone, the WAIT message lasts a very, very long time and nothing gets fixed afterwards.
Thank you for helping me solve my problem if you know the solution.
0
Answer 2 / 23
PIERRE
 
HELLO I had the same problem ENR/COM/PLEASE I went to ADVANCED SETTINGS then OK then

PIN code then press the base button for 5 seconds and enter the PIN code 0000 after when it

goes through its normal cycle it displays philips 1 or 2 you have to unsubscribe a handset and then subscribe

a handset and it worked for me good luck best regards
12
toujours garder espoir
 
Thank you Pierre, you're a buddy. Thanks to you, I’ll be able to call my wife who is on vacation. I was going crazy with this phone. Thank you, thank you.
0
toujours garder espoir
 
Thank you, Pierre, you’re a great friend. Thanks to you, I’ll be able to call my wife who is on vacation. I was going crazy with this phone. Thank you, thank you!
0
Hamid
 
After 2 years your instruction saved me, I read all the manuals nothing
Thank you Pierre
0
cali
 
Thank you so much!!! It's finally working on my Switel DE 181! Thank you very much
0
Sasou > cali
 
HELLO I had the same problem too
0
Answer 3 / 23
N75
 
I have had this phone for only 3 days and I already regret buying it. I can't reset it; "SEARCHING" is constantly displayed. Even when I do: menu - advanced settings - ok - subscription - ok - pin - ok - it responds with "PLEASE WAIT" for 5 seconds and then displays "SEARCHING" again!!!!! Can someone help me? Thank you in advance.
11
peppino
 
I have the same issue, what should I do? Thank you.
0
Answer 4 / 23
blase
 
Thank you! Thanks to you it's working! The problem was the same (eng combined please) and nothing could be done after that...
Following your advice> for (each combined even manipulation) =
1/ go to the advanced settings menu,
2/ go to subscribe before entering the PIN code, press the combined search button on the base
you have 5 seconds for the operation once the operation is done, enter your PIN code and press ok. The phone will ask again and it's all set
with a base +1, 2 or 3 modules
or if purchased in two parts 1 base 1 module and then a base it's always possible (since the modules are not sold (as standalone products it's always at least one base!)
so only plug in the power of the second base and there you go it's a module....
as mentioned above, take each combined and perform the manipulation in front of base number 1....
Thanks again! Spent the morning on it and after reading the forum it was resolved in 10 minutes!
5
flba
 
Thank you, it works wonderfully and saves me from buying a trio.
0
lolo13
 
super, thanks for your explanation
0
Answer 5 / 23
SAMIRA75000
 
HELLO I ALSO BOUGHT THIS PHONE TODAY AND IT DOESN'T WORK THERE'S NO TONE THE WORD WELCOME KEEPS FLASHING AND WHEN I PRESS THE BUTTONS NOTHING HAPPENS EXCEPT FOR BEEPS
PLEASE HELP ME
4
Answer 6 / 23
Niouls
 
Hello

I also had this "search" problem!
I had plugged the base's power supply into the same power strip as the livebox's power supply.
I eventually plugged the phone's power supply into another outlet a bit further away and now it's working fine.

Give it a try!

Bye
2
Answer 7 / 23
Nemensis Posted messages 10 Status Member 2
 
Hi, If I understood correctly, if it's for the subscription, when it says "Wait," it takes a little while but you have to wait; but your second handset needs to be turned on as well. Normally, it should work. I admit that this phone is not very functional ^^
I know it worked for me, but actually, I don't know what "Subscription" is for? lol Could you tell me? Thanks.
1
Answer 8 / 23
bosse
 
Just to let you know, "suche" means "search," bring it to the store, it's less of a hassle, lol.
1
Answer 9 / 23
arwen63
 
I have the same problem with this phone: it keeps blinking "SEARCH" and when I subscribe it doesn't work and it starts again even though I let the subscription finish completely. And my problem is that I only have one base.
0
jo972
 
The problem is that your base is too close to the electrical devices, and as a result, the interference emitted by these devices prevents the synchronization from working properly.
I advise you to move your base at least 1 meter away from your electrical devices (TV, VCR, etc.). Once the synchronization between the base and the phone is established, you can place it wherever you want.
0
Answer 10 / 23
arwen63
 
Thanks for the advice, I tried to subscribe far enough from my electrical devices but it doesn't work, I think I'll have to take it back to the store for after-sales service but it annoys me because it's not even a month old!!!
Thank you.
0
Answer 11 / 23
HDi
 
Hello everyone!
So I have a problem, I don't know what I touched on my phone
but now it says on the screen "ENR/COMB/SVP". I've tried to reset it but it's impossible
plus it hasn't even been 3 weeks since I bought it!!
Thank you for your help!!!
0
tommy
 
0
tommy
 
I found the solution: go to the advanced settings menu, then to subscribe, before entering the PIN code, press the handset search button on the base. You have 5 seconds for the operation. Once the operation is done, enter your PIN code and press OK. The phone will restart and it's all set.
0
annocé > tommy
 
I tried your method but it doesn't work, any other advice ????
0
Answer 12 / 23
tamtam7332
 
I just acquired this CD 150 phone a few days ago and it's already pure happiness :)
The base is connected to a Neuf Box N4. At least twice a day, my two handsets disconnect themselves from the base ("Searching" is flashing) for no apparent reason. I am therefore forced to manually reconnect both handsets: (Press and hold the button on the base, then go to "Advance Settings" and finally enter the original pin 0000). I manage to reconnect them this way, but unfortunately I have to repeat the procedure every day... !

Does anyone have an idea why both handsets regularly disconnect by themselves?

PS: In terms of the Neuf Box, the phone always works... the problem seems to be more with the phone itself.

Thank you.
0
Answer 13 / 23
CAROLBAL27
 
Hello,

I have a problem. We had a storm and now on the screen of my CD 150 phone, it says SUCHE .... this message is flashing.
What should I do to get it working again?

Thank you for your response.
0
Answer 14 / 23
claire
 
Hello,
maybe it works for you, but I followed everything you indicated to the letter, I even placed my phone further away from my ORANGE box, but nothing works.
thank you for your help best regards
0
Answer 15 / 23
ilha213
 
you are too strong thank you I had the same problem!!!!
0
Answer 16 / 23
Yatrophone
 
I had exactly the same problem. I followed the subscription instructions exactly, without any success. Previously, I noted that neither of the two handsets displayed the welcome message (page 14). The country selection did not show up in the menu options (page 32). While trying to subscribe for the thousandth time, I made a mistake and hit OK before finishing entering the PIN code. To my surprise, the welcome message in 17 languages lit up! So I went back to the country selection procedure (page 14). As soon as I selected "France," everything worked like magic. Even on the other handset without me "subscribing" it! The mysteries of "user-friendly" phones. For now, it works. It took me about an hour.
0
Answer 17 / 23
KTR932
 
I bought a Philips CD150 phone and it says on the screen "register handset please." What should I do?
0
Answer 18 / 23
patrick
 
Just remove the batteries and it will work again afterwards.
0
Answer 19 / 23
koj
 
Hello and thank you for all these tips, it finally worked.........I didn't have any tone after a big storm. I thought it was the base that was the problem. But after reading everything that came before, I tried it and voilà, it's working again.
Thanks again!
0
Answer 20 / 23
59oéoé
 
It doesn't work, it makes me wait and then it says searching and it doesn't work, please give me an answer.
0
  • 1
  • 2