View original (French)

TV/DVD player connection for sound

Steph5533 Posted messages 2 Status Member -  
 Steph5533 -
Good evening,
I received my box today. I plugged it in, everything is fine, I have a picture on my TV. However, there is no sound! I then decided to connect my TV to the DVD player, which is connected via several cables to various speakers.
And that's where it gets stuck: no sound.

Where should I connect my red, white, and yellow cables...? Thanks for your help

Configuration: iPhone / Safari 10.0

2 answers

  1.
    Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    Hello and welcome to the forum,

    -Better quality and 5.1 surround sound:
    If your box has a digital optical audio output

    Connect to the "Optical digital IN" of the DVD with an optical cable

    -To get sound from the TV on the DVD/home theater:
    Connect the red and white RCA from the TV at the top left, next to the black cable, to the RCA AUDIO IN of the DVD/home theater and select this input, but it will be in stereo

    I call a spade a spade *
         *in French in the text
    0
    1. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
       
      Optical output:
      Optical cable:
      0
    2. Steph5533
       
      Hello and thank you,
      Unfortunately still no sound... yet when I tune the radio I can hear it.. so the issue doesn't come from the speakers.
      0
    3. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
       
      Did you plug in an optical cable?
      0
  2. Steph5533
     
    The problem probably comes from the fact that it's a monitor and not a TV because I connected my box to the TV using an HDMI-DVI adapter...
    I can swap my two TVs, but is there no other solution?
    0