View original (French)

ETS 2 steering wheel issue

Solved
Anonymous user -  
 Quebecoise -
Hello, the reason I'm reaching out is that I have a big problem. I just got ETS 2 and I'm playing with a steering wheel. So far, so good, except that I don't know if it's the wheel or the game not recognizing the full rotation of the wheel. When I turn the wheel to about 45-60°, the game doesn't register the remaining 45-30°, which causes the wheel to snap at those critical degrees. I'd like to know if you know how I can ensure that the last degrees are recognized (I have a Logitech racing wheel, yes, it's a bit old, 90° turn to the right and 90° to the left).
I hope I'm not confusing you too much with this long post.
Best regards.

--

1 réponse

Réponse 1 / 1
tyler113 Posted messages 6 Status Membre 12
 
Hello, have you checked your wheel settings and compensation
and in your wheel drivers, did you set the wheel axis to the maximum? For example, the original G25 setting is at 540, it needs to be set to 900 in the driver.
12
Anonymous user
 
Hello,
sorry for the late reply
I found the solution; I had set up the controls in the game so that to turn right I assigned the steering wheel that turns right, and vice versa, and I had done the same in the controller settings.
hence the steering wheel turning by itself at the end.
3
Quebecoise > Anonymous user
 

OHHH YEEES THANK YOU What a pleasure to finally find the answer I was looking for! ^_^

0
Lou_pichous
 
Hello.
Could you tell me what setting you changed in the "game controls"?
And in the "controller configurations"???
0
Agent_Cooper > Lou_pichous
 
Hi, he was talking about the default key mappings. Unbind the controls set for turning: left and right, and you should be rid of the issues with the steering wheel that jerks violently at the end.
Best regards
0