View original (French)

Connect 2 TVs to a rooftop antenna

Solved
bienvenue60 -  
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   -
Hello, I installed a rooftop antenna to have a built-in TNT TV in the bedroom, everything is fine, but I would like to know if it is possible to connect the built-in TNT TV in the living room with a 2-output splitter without having to watch the same program; otherwise, it’s not worth it. If so, how to do it? I have a 2-output splitter Ref: 002652.
Thank you in advance for your advice, and since it's not too late yet, Happy New Year.

1 réponse

Réponse 1 / 1
DM
 
Hello,
Just connect the splitter to the incoming antenna and the televisions to the two outputs
which allows you to watch a different program on each set.
Best wishes
15
bienvenue60
 
Thank you DM, now I know it's possible, but I installed an Evology power kit, one on the antenna and the other in the room. The TV works very well, but with the indoor kit that's plugged into the mains, I don't know how to proceed. I'll go to Leroy Merlin this week and ask for help. Have a nice day and thank you for your reply.
0
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   12 197
 
Is this the kit you installed? :
https://www.leroymerlin.fr/v3/p/produits/kit-amplificateur-exterieur-terrestre-et-satellite-1-sortie-evology-e165298
If so, you just need to connect the power supply BEFORE the splitter, with the power supply output connected to the input of the splitter.
0