FUJITSU SIEMENS Amilo Pi 2515 VISTA => XP

Solved
Mitch 6512 Posted messages 7 Status Member -  
 delerico -
Hello everyone,

I have a Fujitsu Siemens AMILO Pi 2515 laptop equipped with original Vista Home Premium. I’m trying to install XP Pro, but no luck. My disk is partitioned and multiboot OK.

Chipset: Intel(R) GM965 Express
Memory controller: 82GM965

The installation starts (F6) then floppy drive OK (please insert disk into drive A... and press Enter).

Inserting the floppy with the fl6 flpy32 driver, the drive works and the !!: Textsetup.oem file not found.

I’ve been researching for 3 days and I’m beginning to despair!

Thanks in advance to everyone

Configuration: Windows XP Internet Explorer 7.0

22 answers

  • 1
  • 2
  1. Mitch 6512 Posted messages 7 Status Member
     
    Hi Bala,
    thanks for the tip.
    1
  2. 3x
     
    Hi.
    Even if you manage to make him swallow XP. Are you sure you can find all the hardware drivers afterwards?
    --
    /!\ (`'-•-.¸xXx¸.-•-'´) /!\
    0
  3. Mitch 6512 Posted messages 7 Status Member
     
    No,
    that’s why I’m looking for help.
    0
  4. baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
     
    hello Mitch....
    Sorry, but the manufacturer having not developed drivers (other than Vista) for this model, I think you will run into trouble persisting in the idea of switching to XP (even in multi-boot)
    Look at what Fujitsu Siemens says in the downloads for the amilo pi 2515
    http://support.fujitsu-siemens.com/fr/support/downloads.html
    for info I have Vista and no more trouble than there was with Xp at the beginning....even less..
    Cheers
    0
  5. Mitch 6512 Posted messages 7 Status Member
     
    Hi Baladur,
    thanks for your reply.
    Actually, this laptop belongs to a colleague who bought it in good faith without worrying about the operating system and thinking she would install software she uses regularly such as AutoCAD, etc...
    She has a brand new machine and doesn’t know what to do with it.
    Hi
    0
  6. baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
     
    Although I'm not sure it will work every time... under Vista it is possible to choose how to run a program...
    By right-clicking the icon or the program in question, then Properties and Compatibility, you can choose to run it under one of the older versions of Windows...
    Hi
    0
  7. Mitch 6512 Posted messages 7 Status Member
     
    Ok, but impossible to install the program
    0
    1. baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
       
      Well... The solution may lie on the manufacturer’s site for the program(s) involved...
      For AutoCAD... see Autodesk
      https://knowledge.autodesk.com
      Don’t hesitate to contact them about the problem by email
      Good luck...
      0
  8. billou72
     
    Hello Mitch 6512,

    An alternative to your problem is to install VMWARE which allows you under Vista to have multiple active OSes, XP, Linux, etc...

    It works correctly.

    Good luck,
    Billou72
    0
  9. Cheyenne
     
    Hello to everyone who responds so kindly,
    I also have this problem. I installed XP because I don’t like Vista, but I can’t find the compatible drivers? mine are from my old PC, I have no sound, no webcam, etc. I’ll try to do what Billou suggests and otherwise I don’t know? thanks to all of you, have a good day, kisses from Masreille
    0
  10. Lilian
     
    hello everyone!

    apparently a good part of the Amilo range was designed with Vista but with ideal features for XP and obviously Fujitsu Siemens didn’t make any effort to develop the drivers... same problem on several topics as far as I can see

    @ cheyenne
    wifi for Siemens Amilo Li 1705 under XP#0
    here is the topic concerning the Amilo Li 1705 .... perfect for XP but shipped with Vista nice business Microsoft huh ?!

    @ soon
    tchuss
    0
  11. Gleich2
     
    Hello,

    Hi Mitch 6512,

    I admire your breath for that, but how about the drivers (sound, VGA, Wi-Fi ...)?????

    C my first problem!

    Thanks to everyone who will respond!
    0
  12. lulune972
     
    Hello,
    I went there, I get to the page where it says the drivers are compatible, xa2528, super happy, I download everything and install the drivers and there, to my great surprise it doesn’t work, but thanks anyway.
    0
    1. baladur13 Posted messages 47335 Registration date   Status Moderator Last intervention   14 392
       
      Oops...!!!
      Look among all the drivers and run a scan... https://www.touslesdrivers.com/index.php?v_page=29
      You’ll at least know what you’re missing
      Hi

      --

      It is very difficult to catch a black cat in a dark room...
                              Especially when it isn’t there...!!!!
      0
  13. Gleich2
     
    Thank you very much Mitch 6512, better late than never.
    @+
    0
  14. fredepor
     
    hello

    Go to www.ma-config.com everything is fine

    Fred
    0
  15. petaia
     
    Hello everyone

    I just bought an Amilo pi 2515 laptop with Windows Vista Premium Home Edition, I tried to format it to install XP Pro SP2 in boot with the CD but it doesn’t recognize the HDD
    if someone could help me
    thanks in advance
    0
  16. Dark-Option Posted messages 6 Status Member
     
    Hi,

    me too I have an Amilo Pi 2515 but when I run the Windows XP PRO CD (legal), before the installation it tells me there are no hard drives! So please help me!

    I can't stand Windows Vista anymore!

    Thanks in advance.
    0
    1. mitch6512
       
      Hello Dark option and Petaia,

      Have you tried a low-level format.
      If not, you should be able to find a low-level formatting program from the drive manufacturer (Western Digital in my case).
      When I installed XP on an AMILO PI 2515, I hadn't done it.
      However, my father-in-law has a MEDION Vista laptop on which I installed XP and where the modified CD in the same way as for the AMILO 2515 did not work. I had to perform a low-level format for the HDD to be recognized.

      Courage to all,

      mitch6512
      0
      1. Musicbox > mitch6512
         
        Hello,

        To perhaps provide a solution for some to reinstall a PC whose hard drive is not recognized, one must check if the drive is properly detected by the PC BIOS (F2, Del or other at startup) and if it is detected and the drive is SATA, some BIOSs allow starting the PC without the native SATA mode, which allows starting the XP installation. Once the XP installation is finished, re-enable the native SATA option in the BIOS, the PC should boot and run correctly.

        For systems with recovery partitions, it is preferable to make an image (Ghost, or others) of each partition, or the entire disk to reinstall the PC as it came from the factory, i.e. with the software provided and preinstalled at purchase.

        Reinstalling Windows from the CD installs a basic Windows very quickly but devoid of any integrated programs, the driver updates having to be done afterwards by downloading the drivers appropriate for the PC from the manufacturer's site.

        Tip: start by finding the network drivers to finish the other updates from the PC; if the network cards are not recognized after Windows installation, use a USB key or other media to load them from another PC (or a friend's, neighbor's, ...).
        Once Internet access is available, perform Windows Update (or better later, Microsoft Update) and choose "Custom" to also display any available device drivers.
        After your multiple restarts, look for missing drivers on the manufacturer's site first and then elsewhere if the driver in question is not available. www.ma-config.com helps a lot to find what is missing.

        There you go, I hope with these infos beginners will be able to manage reinstalling their system.

        Good luck to all and best regards.

        Pascal B. (Switzerland)
        0
    2. talbert
       
      Hello, I have an Amilo Pro 2515 for which I have lost the driver CD and I’m looking to obtain a copy. Could you help me? Thank you in advance. mkerleau@wanadoo.fr
      0
  17. Dark-Option Posted messages 6 Status Member
     
    Okay, thanks for this advice but now I’m trying to engrave my drivers on my Windows XP Professional
    0
  18. Musicbox
     
    Hello,

    for the drivers of your laptops and other PCs, preferably download the drivers from the manufacturer's website (Fujitsu-Siemens, Dell, HP, Compaq, Toshiba, etc) and to respond to Talbert, go to: http://be.ts.fujitsu.com/fr/support/downloads.html

    Best regards
    0
  19. Black-Label
     
    Hello, for driver issues on XP, try going to the manufacturers’ sites, but for the hardware. Realtek for the sound card, etc... I just moved an Amilo Pi 2515 (with a lot of trouble, admittedly) to Seven Ultimate (Windows 7 Ultimate), which runs much better than Vista; it handles RAM and the processor better. The only problem (which Fuji doesn’t seem to have solved) is the keyboard that “locks” on the CTRL and ALT GR keys at startup (Possibility to unlock by removing the driver or by using the on-screen keyboard. (If I resolve the keyboard issue, I’ll tell you the steps to take) Sincerely, Black-Label Net.
    0
  20. Mitch 6512 Posted messages 7 Status Member
     
    Hi billou72,
    Sorry for the late reply, but this last month after spending a few sleepless nights and burning about forty CD-Rs with Nlite and other tools I finally, thanks to a thread whose address I’m attaching, managed to install XP.
    In the meantime I had installed VMware which works well and I was pleased to rediscover XP. The only issues are that the USB devices and the CD reader are not recognized. I also think the ideal would be to have 1GB of RAM extra because currently with my 1GB, of which 768MB are allocated to Vista and 256 to XP, it's slow.
    Thanks for the info as it can always be useful.

    http://geeksasylum.free.fr/...

    thanks to everyone,
    see you,
    -1
  • 1
  • 2