View original (French)

Set SATA hard drives to master and slave

woodhull Posted messages 11 Status Membre -  
 woodhull -
Hello everyone,

I damaged my laptop SATA hard drive and I can no longer access it despite the recovery CDs.
I wanted to set it as a master/slave on my desktop computer, which has 2 SATA hard drives, but the connectors are not the same as the HDD from my laptop.
What can I do? Thanks for your answers.

2 réponses

Réponse 1 / 2
quentin2121 Posted messages 9063 Registration date   Status Membre Last intervention   Ambassadeur 1 311
 
Put it in an external hard drive enclosure, in SATA, and you will connect it to your desktop PC via USB!
0
woodhull Posted messages 11 Status Membre
 
Thank you Quentin for this answer, but I don't understand "connect via USB".
0
quentin2121 Posted messages 9063 Registration date   Status Membre Last intervention   1 311 > woodhull Posted messages 11 Status Membre
 
Using the external hard drive enclosure, into which you will place your external hard drive, you will connect it via USB to your desktop computer.
0
woodhull > quentin2121 Posted messages 9063 Registration date   Status Membre Last intervention  
 
Thank you Quentin, I therefore need to buy a case in which my hard drive will be integrated and that I will connect via USB.
Thank you for this answer.
0
Réponse 2 / 2
phil2k Posted messages 10841 Registration date   Status Contributeur Last intervention   2 339
 
Hello

The pinout of SATA drives is the same for laptops and desktops.

Are you sure they are all SATA?

--
There are 3 kinds of people: those who can count and those who can't.
0