Lost drivers on Axdia gmbh WINPAD 12 (Odys) Solved

Question

Hello,

I'm posting a message here after trying everything to fix my problem without success...

About a week ago, Windows 10 performed an automatic (and rather long) update, after which I lost sound on my Axdia GmbH WINPAD 12 (Odys).
"No audio device is installed"
I tried updating the drivers and installing new ones, but that didn't work.
Once again, I succeeded in installing an Intel driver that made the volume control reappear and detected the speakers, but the sound still didn't actually work.

I then used helper software like DriverCloud or DriverPack Solution, which offered me "updates" that ultimately removed other functions like the touchscreen, battery manager, access to my external hard drive (micro SD card), and reduced the screen brightness.

When trying to revert to the previous drivers, I messed it up (the OS was originally in German, so it was quite complicated for me) and had to reinstall Windows, wiping my data in the process.

I attempted the same solutions again, being more careful the second time, but ended up with the same result.

So here I am with my second Windows 10 reinstallation, and I'm now without all the following functions: touchscreen, sound, access to the SD card, and low brightness, which means I'm, of course, missing certain drivers that I can't seem to find.

DriverCloud confirms that everything is up to date, and DriverPack Solution has let me down several times, so I'm not trying that again.

Needless to say, I'm in despair, I need your help!

jeanbern · Answer

Hi, did you go see >HERE< ? -- The stone and the pebble fall at the same speed (an old Chinese proverb)

K665 · Answer

Yes, the drivers are not available on this site so I don't see how it's useful?

jeanbern · Answer

look at the 7th and the 8th from the top -- The stone and the pebble flow at the same speed (an old Chinese proverb)

jeanbern · Answer

try the 7th, it should be the same!! GpioVirtual should (normally) identify your drivers and if needed find the ones you need
Be careful, I said "should"

--
The stone and the pebble sink at the same speed (an ancient Chinese proverb)

jeanbern · Answer

try to go >HERE<  And start the detection -- The stone and the pebble sink at the same speed (an old Chinese proverb)

K665 · Answer

Hey, I'm coming back to ask another question, the camera driver hasn't returned, any idea where I could find it?

jeanbern · Answer

Not easy! I wrote them a message to send us a download link I hope they will respond -- The stone and the pebble flow at the same speed (an ancient Chinese proverb)

jeanbern · Answer

wait! I may have found it: >HERE< I think it should be the same as on the V10 -- The stone and the pebble fall at the same speed (an old Chinese proverb)

jeanbern · Answer

Here is their response:
Hello Sir,
please find the latest drivers for your Odys Winpad 12 tablet:

http://www.axdia.de/web/scripts/download.php?datei=Firmware%2FMID%2FODYS_Winpad12%2FDriver%2FODYS_Winpad12_Win10_Driver.zip

Best regards.

Adriana María Jonkisz

Axdia International GmbH
Formerweg 9, D-47877 Willich

Fax: +49(0) 2154 / 8826-100
E-mail: jonkisz@axdia.de
Web: www.axdia.de | www.odys.de

--
The stone and the pebble flow at the same speed (an ancient Chinese proverb)

K665 · Answer

Totally! Thanks, but I can't install them, there's no setup and when I try manually it says I already have the best driver installed (but the camera(s) don't work).

jeanbern · Answer

Hi, I'll check with them -- The stone and the pebble flow at the same speed (an ancient Chinese proverb)

jeanbern · Answer

Not easy to understand: Good day,Currently, Microsoft is releasing many Windows 10 updates that repeatedly remove the internal cameras as well as the position sensors from the system or technically disable the drivers. Please understand that we have no control over this.Regarding the cameras, a solution has not yet been produced by Microsoft for some devices, so control can only be realized through an additional program for the time being.Please download the program "MANY CAM".If the switching between the front and rear camera works with this, you will inevitably have to wait for another Microsoft update.In the meantime, you can use the Many Cam program for switching the camera controls.If this does not help, you can reinstall the drivers under the Windows Device Manager.You can find the original driver packages for the devices athttp://www.axdia.de/web/scripts/download.php?datei=Firmware%2FMID%2FODYS_Winpad12%2FDriver%2FODYS_Winpad12_Win10_Driver.zipBest regards,Adriana María Jonkisz  Approximate translation: Regarding the other cameras, a solution has not been produced by Microsoft for some devices, so the control can only be achieved through an additional program. Please download the "MANY CAM" program below again. If the switching between the front and rear camera works with this, you will inevitably have to wait for another Microsoft update. In the meantime, you can use Many Cam for switching between them for the control of the cameras. If this does not work, you can reinstall the drivers in the Windows Device Manager. You can find the original driver packages for the devices at: http://www.axdia.de/web/scripts/download.php?datei=Firmware%2FMID%2FODYS_Winpad12%2FDriver%2FODYS_Winpad12_Win10_Driver.zip But where is MANY CAM??? The stone and the pebble flow at the same speed (ancient Chinese proverb)

Lost drivers on Axdia gmbh WINPAD 12 (Odys)

12 réponses

Texture issues in enshrouded

Pixma mx495 printer error code b204 and still under warranty

Canon mb5350 - cartridge replacement impossible

Expired hp cartridge

Pc that turns off by itself after 10 minutes

I can't subscribe on instagram anymore.

Connection issue with the system events service

What does 250mb/500mb mobile internet represent?

My logicom riva 250 displays searching

Installation du logiciel gps x970t via michelin