Transformer un cable telephone en RJ45
Solved
jacot55
-
Olee -
Olee -
Bonjour,
voilà mon problème
je voudrais transformer un cablage de téléphone en réseau ethernet
les couleurs sont rose, bleu, gris, orange, jaune, blanc, violet et marron
dans quel sens je dois mettre les couleurs dans ma prise RJ 45
merci de m'aider
voilà mon problème
je voudrais transformer un cablage de téléphone en réseau ethernet
les couleurs sont rose, bleu, gris, orange, jaune, blanc, violet et marron
dans quel sens je dois mettre les couleurs dans ma prise RJ 45
merci de m'aider
5 answers
Hello,
we only need to respect the pairs and wire them the same at both ends (straight cable)
the tradition is:
pair 1 white/gray on 4/5
pair 2 yellow/orange on 3/6
pair 3 blue/colorless or pink on 1/2
pair 4 brown/purple on 7/8
another convention:
and also:
however,
depending on the cable used your speed may have to be limited to 10Mbit/s since the PTT 278 (cat3) does not allow more, while the PTT298 allows 100 in principle.
and ... There you go!
we only need to respect the pairs and wire them the same at both ends (straight cable)
the tradition is:
pair 1 white/gray on 4/5
pair 2 yellow/orange on 3/6
pair 3 blue/colorless or pink on 1/2
pair 4 brown/purple on 7/8
another convention:
and also:
however,
depending on the cable used your speed may have to be limited to 10Mbit/s since the PTT 278 (cat3) does not allow more, while the PTT298 allows 100 in principle.
and ... There you go!
I'm super happy, reusing an old phone cable.
I'm getting 1000 Mbps on a 298 PTT cable! :-)