Transform a telephone cable into RJ45
Solved
jacot55
-
Olee -
Olee -
Hello,
here is my problem
I would like to convert a telephone wiring to Ethernet network
the colors are pink, blue, gray, orange, yellow, white, purple, and brown
in what order should I place the colors in my RJ 45 plug
thank you for your help
here is my problem
I would like to convert a telephone wiring to Ethernet network
the colors are pink, blue, gray, orange, yellow, white, purple, and brown
in what order should I place the colors in my RJ 45 plug
thank you for your help
5 answers
Hello,
we only need to respect the pairs and wire them the same at both ends (straight cable)
the tradition is:
pair 1 white/gray on 4/5
pair 2 yellow/orange on 3/6
pair 3 blue/colorless or pink on 1/2
pair 4 brown/purple on 7/8
another convention:
and also:
however,
depending on the cable used your speed may have to be limited to 10Mbit/s since the PTT 278 (cat3) does not allow more, while the PTT298 allows 100 in principle.
and ... There you go!
we only need to respect the pairs and wire them the same at both ends (straight cable)
the tradition is:
pair 1 white/gray on 4/5
pair 2 yellow/orange on 3/6
pair 3 blue/colorless or pink on 1/2
pair 4 brown/purple on 7/8
another convention:
and also:
however,
depending on the cable used your speed may have to be limited to 10Mbit/s since the PTT 278 (cat3) does not allow more, while the PTT298 allows 100 in principle.
and ... There you go!
I'm super happy, reusing an old phone cable.
I'm getting 1000 Mbps on a 298 PTT cable! :-)