[TI-89] connection issue Solved/Closed

Question

Hello,

I bought the TI89 Titanium calculator, and I also installed TI connect, but I can't establish a connection between the PC and the calculator. In the communication settings, I set:

Unit: TI-89

Type of cable: USB Cable

Port: USB

Despite all this, it's impossible to establish the connection.

Thank you in advance for your help.

Configuration: Windows XP Firefox 2.0.0.3

back2analog · Accepted Answer

Have you switched your calculator to transfer mode? -- A revelation for some: Google really exists! Your best anti-spyware is yourself!

Anonymous user · Answer

You need to go to "VAR-LINK", "Connection" and then "send", right? If that's the case, yes I did it.  Any other ideas?

Anonymous user · Answer

It's all good, I found out it's because I didn't have the right version of "TI Connect."  Thanks anyway for your help.

Seilin · Answer

Hello, I also bought a TI 89, but the "usb" option does not appear in the "ports" category, there is only com1 and com3. Could someone help me? I'm not very familiar with computer hardware!!
Thank you.

doudou · Answer

I have the same problem and I only have the choice com3. Otherwise, when I go to the send connection, it says no response from the unit. Please help me.

spirodu86 · Answer

Hello, If you have installed the drivers correctly, you can just start a transfer and it will search automatically... It's obvious... Good LUCK ;)

spirodu86 · Answer

Hello, And uh, don’t forget to check that you have the latest version of ti conect.

manu · Answer

Hello,  I also have a problem connecting my TI-89 to the computer: I launch TI Connect and it doesn't detect the TI-89, what should I do (with the computer and the calculator)?

spirodu86 · Answer

Hello, If you have installed the drivers correctly, you just have to start a transfer, it will search automatically... for it goes without saying... Good LUCK ;)

Thomas · Answer

Hello, To connect the TI89, you go to 'var link', and then? Link, send? Why don't these functions appear in my menus (my TI89 is not a titanium, it's a version 1.00)?

spirodu86 · Answer

there's nothing to do with the ti except turn it on, then you start a transfer, the ti will connect and search automatically... as for the rest, it goes without saying...  ++

GODSUN · Answer

Hello,
I HAVE A TI89 TITA. I WAS IN THE MIDDLE OF TRANSFERRING PROGRAMS TO ANOTHER TI89 TITA BUT BOTH CRASHED SIMULTANEOUSLY. THEY NO LONGER RESPOND AND I DON'T KNOW WHAT TO DO. I REMOVED THE BATTERIES BUT WHEN I PUT THEM BACK IT IS STILL FROZEN.

spirodu86 · Answer

Hello,

Reset the flash memory, all your programs and files will remain... except those that are not archived...
To do this, press simultaneously [2ND], the right arrow, the left arrow and [ON]!

Good luck and @+(keep us updated...

PS: If you have any problems with your TI, go to

- http://www.ti-paradize.fr/forum/index.php
- http://www.total-ti89.com/?file=Forum]]total-ti89

spirodu86 · Answer

- http://www.ti-paradize.fr/forum/index.php  Go here, it's more appropriate... and I'll help you...

||[S]celus · Answer

Help, please! I can't connect my TI anymore, the computer doesn't recognize it anymore!!!!!! I have a brand new TI-89 Titanium, which I'm quite proud of, and I connected it to the PC to send a few programs. Then I was offered to change the operating system. At that moment, I got a little error message that made me repeat the download of the system update.... And I finally got it, which I later regretted (some Apps disappeared.....) Maybe the problem comes from that? Perhaps the system wasn't completely downloaded? Anyway, the problem appeared, I did everything I could to fix it: reset the system in several ways, changed the batteries, etc... I reinstalled the TI Connect software. Desperate, I was browsing the forums when I found a case quite similar to mine, with the same message: "USB device not recognized One of the devices blablabla...." (the guy ended up going to see his dealer: it was an internal problem and he got a new one) Grrr I can't do that! So if you have an idea or a solution, please let me know ^^

spirodu86 · Answer

- http://www.ti-paradize.fr/forum/index.php  Go here, it's more appropriate... and I will help you...

leitofalco · Answer

I have the same issue with COM ports 1 and 3 I can't get a USB port to work.

spirodu86 · Answer

Go here - http://www.ti-paradize.fr/forum/index.php or here - https://tisolutions.forum-actif.net/forum   It's more appropriate...and I would help you...

mimou · Answer

Hello,
I have a TI 89 titanium, I installed the software on my PC and now I would like to transfer data from my PC to my TI, but the format of my documents (WORD) is not supported by the TI.
What should I do?

spirodu86 · Answer

Go here - http://www.ti-paradize.fr/forum/index.php or here - https://tisolutions.forum-actif.net/forum  It's more appropriate...and I will help you...

leitofalco · Answer

I can't figure out how to use the program I sent on the ti If someone could help me Thanks Spiro from 86, I managed it

ludivine · Answer

Hello to all TI 89 Titanium pros!  I have a huge problem three days before my exam, so it's urgent:  I've had my TI for a year and I've always used StudyCards with TI Connect to upload my notes into it.  Today, whenever I try to start the transfer of the study cards to put them in the calculator, it shuts off suddenly, TI Connect displays "unable to find the device... blah blah blah..." and I can't turn my calculator back on unless I take out the batteries and then put them back in!! What should I do???  Where does this problem come from??  I should mention that I'm using USB port COM 4...  Thank you for your quick response...

spirodu86 · Answer

hello,  I'm fed up with posting the same thing all the time...  - http://www.ti-paradize.fr/forum/index.php Go here, it's more appropriate...  Otherwise, try hibview but be careful, I rarely visit this forum, I'm more on the one above!  Good luck and see you!

mam78 · Answer

HELLO I HAVE A CONNECTION ISSUE WITH MY TI89 (1ST VERSION) I HAVE INSTALLED THE LATEST VERSION OF TI CONNECT BUT NEITHER OF MY COMPUTERS RECOGNIZE THE CALCULATOR PLEASE HELP ME

spirodu86 · Answer

Hello,  I'm fed up with always posting the same thing...  - http://www.ti-paradize.fr/forum/index.php Go here, it's more appropriate...  ++

fuckerdolls · Answer

Hello, I'm trying to program Bézout's theorem on my TI 89 Titanium calculator, and I have a big problem: I don't know how to make the arrows.  Like this:  : Bezout (a,b) : Prgm  : 1 &#8594; u  : 0 &#8594; x  : 0 &#8594; v  : 1 &#8594; y  ...  Thank you in advance for your response,  PS: And how do you go to the next line too? Thanks.

Zohra · Answer

Hello, I have an old TI 89 model and I am using a gray cable. My computer recognizes the cable, but it won't transfer. I have indeed selected the gray cable in the link menu, port one or two, and the calculator is turned on to the home page. I don't understand..... Please help me!!!!

spirodu86 · Answer

Hello,  I'm tired of posting the same thing over and over... seriously... you need to read before posting all the time!  - http://www.ti-paradize.fr/forum/index.php Go here, it's more appropriate...  ++ -- Spiro

besboss29 · Answer

Hello, I have a TI-83+ with the USB cable and TI Connect 1.6 Unfortunately, no matter how much I search, my TI is not found, either with TI Connect or on the computer (device manager). Yet it is plugged in and turned on. What should I do?

riFF · Answer

Hello,  I just bought a Ti 89 and the problem is the following: When I want to receive a program from a friend using the connection cable between the TIs, the same recurring message "Memory" keeps appearing. I don't understand how to get past this error.  Thank you in advance.

petitchti · Answer

Same problem for me AND I FOUND THE SOLUTION!!!!! (at least it works for my case)
With a new TI-89 titanium and Windows XP, I had installed TI-connect
I only had the choice of COM1 or COM3 even though I plugged it into a USB :/

So I went to start>control panel>system>hardware>device manager>USB bus controllers and there I saw "TI-89 titanium" or "TI Educational handheld device" with a yellow exclamation mark (not a good sign :/)...
I right-clicked on it, updated the drivers, and then I got an error message saying there was no Windows logo (anyway!) I chose to continue and then....
POUFF!!!
Like magic, upon restarting TI-connect, I now had, in addition to COM1 and COM3, the choice USB1 to which the calculator was connected and now it works =DD

There you go, hoping it works for you now
Have a good evening/morning/day/night =D

[TI-89] connection issue

31 answers

Blocked computer not accessible

Second screen resolution inaccessible

Lost tnt channels (via antenna)

Problem with open office spreadsheet

My printer won't connect to my pc anymore

How to change this awful ringtone?

Computer blocked

Asus vivobook pc won’t boot anymore, need help

Copy/paste scanned text jpeg format

Startup error message