Driver for Packard Bell Easynote LE11BZ 32-bit computer
Solved/Closed
rymlat
-
chachacha -
chachacha -
Hello, as mentioned in the title, I have a Packard Bell Easynote LE11BZ 32-bit laptop. After a system restore issue, I had to format my hard drive and reinstall Windows with a CD, but I have no drivers anymore. I searched on several forums but couldn’t find any possibility to get them. I went to the Packard Bell download support, and there are drivers for my computer, but only for 64 bits.
So I would like to know if someone could provide me with a link to download the 32-bit drivers or could send them to me if they have the same computer as mine, thanks in advance.
So I would like to know if someone could provide me with a link to download the 32-bit drivers or could send them to me if they have the same computer as mine, thanks in advance.
8 answers
-
Hello,
In Device Manager, right-click on "Network Controller," select "Properties" and then "Details."
Click on the drop-down menu, select "Hardware IDs."
Post the information (example: PCI\VEN_1969&DEV_1026&SUBSYS_82261043&REV_B0).
Just copy the first line; that's enough.
Do the same for the other incorrectly installed devices. -
Hello,
Try looking here:
https://www.pcastuces.com/pratique/windows/maj_pilotes/page1.htm
Have a good evening -
Hello, while researching your issue, I found a solution. Go to the following site https://www.packardbell.com/pb/fr/FR/content/download, install the drivers one by one, and restart the machine after each driver installation.
-
As I mentioned before, on the Packard Bell support they don't have it in 32bits and the Nano1999 software requires the internet, but without the drivers I don't have it.
-
-
Oh really?
How did you do it? -
-
Okay ^^
Good evening.
