Driver for Packard Bell Easynote LE11BZ 32-bit computer
Solved/Closed
Anonymous user
-
chachacha -
chachacha -
Hello, as mentioned in the title, I have a Packard Bell Easynote LE11BZ 32-bit laptop. After a system restore issue, I had to format my hard drive and reinstall Windows with a CD, but I have no drivers anymore. I searched on several forums but couldn’t find any possibility to get them. I went to the Packard Bell download support, and there are drivers for my computer, but only for 64 bits.
So I would like to know if someone could provide me with a link to download the 32-bit drivers or could send them to me if they have the same computer as mine, thanks in advance.
So I would like to know if someone could provide me with a link to download the 32-bit drivers or could send them to me if they have the same computer as mine, thanks in advance.
8 réponses
Hello,
In Device Manager, right-click on "Network Controller," select "Properties" and then "Details."
Click on the drop-down menu, select "Hardware IDs."
Post the information (example: PCI\VEN_1969&DEV_1026&SUBSYS_82261043&REV_B0).
Just copy the first line; that's enough.
Do the same for the other incorrectly installed devices.
In Device Manager, right-click on "Network Controller," select "Properties" and then "Details."
Click on the drop-down menu, select "Hardware IDs."
Post the information (example: PCI\VEN_1969&DEV_1026&SUBSYS_82261043&REV_B0).
Just copy the first line; that's enough.
Do the same for the other incorrectly installed devices.
said
more explanation please
Cédric
Little tip to note! Thank you very much.
chachacha
Where do we copy it to paste it?
Hello,
Try looking here:
https://www.pcastuces.com/pratique/windows/maj_pilotes/page1.htm
Have a good evening
Try looking here:
https://www.pcastuces.com/pratique/windows/maj_pilotes/page1.htm
Have a good evening
Hello, while researching your issue, I found a solution. Go to the following site https://www.packardbell.com/pb/fr/FR/content/download, install the drivers one by one, and restart the machine after each driver installation.
As I mentioned before, on the Packard Bell support they don't have it in 32bits and the Nano1999 software requires the internet, but without the drivers I don't have it.