View original (French)

LNB surcharge de puissance

Cernnunos24 -  
croac Posted messages 1 Registration date   Status Member Last intervention   -
Hello,

I tried connecting a universal twin-output satellite head. The first output is connected to my Canal decoder and everything works perfectly as before. However, I connected the second output to an HD Multimedia satellite receiver and I'm unable to get any channels. It even shows me the following blinking message: LNB power overload! Quit (exit). Could someone give me some informed advice on my problem? Thank you very much in advance.

Configuration: Windows Vista / Firefox 20.0

2 answers

Answer 1 / 2
croac Posted messages 1 Registration date   Status Member Last intervention  
 
Hi,
I arrived 3 years after the war, but this problem only happened to me 15 days ago! It wasn't a matter of wiring/connectivity/coaxial between the decoder and the universal LNB, nor a faulty LNB; it was "simply" a polarized electrolytic capacitor that failed in the terminal due to an overload, it was bulging, I replaced it and everything is working again like in "the year 40"!
If it can help...... because this kind of problem is still relevant!!!

Joe
0
Answer 2 / 2
gil
 
You should read the response "LNB Overload" already provided before asking the same question which also means "resolved"

""""" overload in French or short circuit, check the wiring/connectivity/coaxial between the decoder and the universal LNB, or it might be the latter that is faulty.... ""
-1