PORT RS-232-C
zaizafoun
Messages postés
1
Statut
Membre
-
dubcek Messages postés 18808 Date d'inscription Statut Contributeur Dernière intervention -
dubcek Messages postés 18808 Date d'inscription Statut Contributeur Dernière intervention -
Bonjour;
j'ai un problème pour connecter mon ordinateur et un dispositif ORTEC 974 Quad Counter/timer via un câble RS-232-C pour assurer leur communication.
Mon adresse mail est: jablihoucine@yahoo.fr
Merci pour me répondre.
j'ai un problème pour connecter mon ordinateur et un dispositif ORTEC 974 Quad Counter/timer via un câble RS-232-C pour assurer leur communication.
Mon adresse mail est: jablihoucine@yahoo.fr
Merci pour me répondre.
Configuration: Windows XP Internet Explorer 6.0
A voir également:
- PORT RS-232-C
- Advanced port scanner - Télécharger - Utilitaires
- Port usb bloqué par administrateur ✓ - Forum Windows
- Casque sennheiser rs 120 problème - Forum TV & Vidéo
- Port ping ✓ - Forum Programmation
- Ouvrir port utorrent ✓ - Forum Téléchargement
1 réponse
Quel genre de problèmes ?
le cable est correct ? croisé pas croisé ?
vitesse, data bit, start bit, stop bit sont bien les mêmes sur les 2 interfaces ?
http://www.ortec-online.com/electronics/ctr/974.htm
SERIAL INTERFACE CONTROL (S-2) An 8-position slide switch accessible through a cutout in the left side panel. Sections 1 through 4 select the counting channels whose contents will be transmitted when data is transferred to the computer or terminal. If the corresponding switch is set for print, the data for that counting channel will be transmitted; if set to the skip position, the data will not be transmitted. Section 5 selects the length of the data byte that will be transmitted over the serial communications interface. "On" selects 7 data bits; "Off" selects 8 data bits. Section 6 is used to enable or disable the parity generation and checking when characters are sent or received over the serial interface. If parity is enabled, Section 7 selects either odd or even parity mode. Section 8 selects whether one or two stop bits are added to the character transmitted over the serial interface.
BAUD RATE SELECT (S-3) A 4-position slide switch accessible through a cutout in the left side panel. This switch selects the baud rate at which characters are transmitted and received over the serial communications interface.
le cable est correct ? croisé pas croisé ?
vitesse, data bit, start bit, stop bit sont bien les mêmes sur les 2 interfaces ?
http://www.ortec-online.com/electronics/ctr/974.htm
SERIAL INTERFACE CONTROL (S-2) An 8-position slide switch accessible through a cutout in the left side panel. Sections 1 through 4 select the counting channels whose contents will be transmitted when data is transferred to the computer or terminal. If the corresponding switch is set for print, the data for that counting channel will be transmitted; if set to the skip position, the data will not be transmitted. Section 5 selects the length of the data byte that will be transmitted over the serial communications interface. "On" selects 7 data bits; "Off" selects 8 data bits. Section 6 is used to enable or disable the parity generation and checking when characters are sent or received over the serial interface. If parity is enabled, Section 7 selects either odd or even parity mode. Section 8 selects whether one or two stop bits are added to the character transmitted over the serial interface.
BAUD RATE SELECT (S-3) A 4-position slide switch accessible through a cutout in the left side panel. This switch selects the baud rate at which characters are transmitted and received over the serial communications interface.
