Vista WiFi Connection

Solved
jpab Posted messages 3 Status Member -  
 Merci -
Hello,
I currently have an XP connected via wifi to my Livebox Inventel and it is connected to the Internet.
I'm trying to connect a Vista via wifi, and I get the following message when I go to 'connect to a network': 'The saved settings on this computer for the network do not match the requirements for the network'. What settings is it referring to?
I should add that I changed the channel to 10 and the security is set to 'WPA only'. Moreover, the Vista is connected via Ethernet to the Livebox and works perfectly.
Thank you.
Configuration: Windows Vista Livebox Inventel

24 answers

  • 1
  • 2
adilbig22 Posted messages 13 Status Member 639
 
HI
I work with a hotline (technical support) and I can give you the solution for this problem. Indeed, the message "The parameters saved on this computer for the network do not match the configuration required for the network" appears because the network is already saved on your computer and you are trying to connect to the same network with different settings. You need to go to Start / Control Panel / Network and Sharing Center / Manage Wireless Networks / and remove all the networks from your list, then restart the computer. After that, you can access your modem's interface and change your network name (SSID) and the broadcast channel if the signal is weak. Then go to Start / Connect, choose your network, click Connect, and enter the WPA security key preferably, and it should work.

GOOD LUCK
280
tony06403
 
Thank you very much, I no longer have this message thanks to you!
0
reglo
 
Thank you so much adilbig22, you solved my problem.
0
  • 1
  • 2