View original (French)

Setting channels on LG 32 LK 330

OLIV -  
 setphanie99@ -
Hello,

Following the change of TNT frequencies in the Cherbourg area, I initiated an automatic frequency search. Now, my LG 32 LK 330 TV is asking for a code (which wasn't required during the initial setup!). What's the trick?

3 answers

  1.
    Blog_LG_France Posted messages 1870 Status Member 2 044
     
    Hello @OLIV,
    In this case, I invite you to perform a "factory reset" of your screen.
    This can be done through the main menu of your screen, option tab, in the "Factory Settings" section.

    To confirm this operation, the service may ask you to enter a code. If you don't remember your access code, enter 0325 (or 7777).

    The operation will reset your screen's presets, and upon restarting it, you will be prompted to perform a new configuration: country (make sure to select the country you reside in to avoid issues related to channel frequency), language, password personalization, and finally, a channel search.

    During the tuning process, you will find two sections: Secam search and automatic numbering; I strongly recommend checking both sections before starting your channel search.

    Once the automatic search is complete, I invite you to test a programming. Logically, your screen should no longer switch automatically to analog, as this signal is no longer distributed in France.

    --
    Blog LG Electronics France
    14
    1. Mp
       
      Bonsoir, j'ai essayé 7777, ça n'a pas fonctionné.
      0
    2. ND
       
      Thank you for this tip, it worked for me with the 0325!! Thanks again.
      0
    3. kacoul
       
      I'll give it a try. I'll let you know.
      0
    4. fkfk92
       
      Hello, my LG32Lk330 television turns off a few seconds after being turned on. I tried the manual settings but it didn't help. Please help me get it working again. Thank you.
      0
    5. macpara
       
      nickel the code 0325, thank you
      0
  2. Okok
     
    I did exactly what you asked, but nothing works; it still doesn't work!!
    0
    1. nico
       
      for your information, you need to enter the code 0325 several times

      1) 1st time: enter password
      2) 2nd time: configure password
      3) 3rd time: validate password

      basically, that's about it
      0
  3. setphanie99@
     
    I have a problem with the password; I tried everything, impossible, nothing works.
    -1