BBox DHCP disabled
Solved
boubsy
Posted messages
2
Registration date
Status
Member
Last intervention
-
boubsy Posted messages 2 Registration date Status Member Last intervention -
boubsy Posted messages 2 Registration date Status Member Last intervention -
Hello.
I have a Thomson TG787 bbox.
I disabled the DHCP service because I heard it would improve online gaming quality; looking at the interface, I thought it wouldn't change anything major, big mistake. :/
While doing some digging, I read that it was an IP issue and that I should change them manually, but how? And with what settings? My current IP starts with 168.x...
Or how can I reactivate the DHCP service?
Thanks.
Configuration: Windows 7 / Firefox 12.0
I have a Thomson TG787 bbox.
I disabled the DHCP service because I heard it would improve online gaming quality; looking at the interface, I thought it wouldn't change anything major, big mistake. :/
While doing some digging, I read that it was an IP issue and that I should change them manually, but how? And with what settings? My current IP starts with 168.x...
Or how can I reactivate the DHCP service?
Thanks.
Configuration: Windows 7 / Firefox 12.0
3 answers
-
Hello,
To reactivate DHCP, just repeat what you did to disable it; I can't tell you better than that.
Then, DHCP is not essential; you can set a static IP address for your PC or console.
For example:
IP address: 192.168.1.20
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS:-
-
-
The default gateway is indeed 192.168.1.254 on the Bbox.
The DHCP pool ranges from 1 to 100 by default. To assign a static IP address to a host, you need to choose a free address outside the pool. This will avoid any risk of address conflict the day boubsy reactivates the DHCP server (which I recommend he does). -
-