192.168.1.1 connection issue Solved/Closed

Question

Hello, I have a big problem. I’ve set up a Wi-Fi connection and the manual tells me to go to this website http://192.168.1.1. Since I have a Linksys WRT54G router, I shouldn’t enter a username but the admin password. However, my problem is that even though I enter the password, I can’t connect to this page. A red page appears and it says
"401 Unauthorized
Authorization required. " I would really appreciate it if someone could tell me what to do. Thank you in advance.

mimilom · Accepted Answer

Hello,

I think that to initialize it, you need to press next to the WAN port of your router (if it’s a Linksys on a button marked Reset). Using a paperclip, press this button while your router is powered on for at least five seconds.

Enable DHCP on your workstation and connect behind your router to the LAN port with a straight Ethernet cable (not via Wi-Fi).

Since the address is not always 192.168 ..., press Windows+R and then

cmd

and then

ipconfig /all

, hit enter, and take the one where it says server or gateway.

Once connected, launch the browser by entering in the address bar (not in Google but in the top bar): 192.168.1.1 (or 192.168.0.1 or the address retrieved previously) and confirm. Normally, a dialog box should appear.

Enter the default username and password for your box (often written underneath the box, it’s usually admin as Username and admin as Password).

Try the following credentials in order, being careful with case sensitivity (Uppercase / lowercase):

User</td>Passwordadminadminadminadmin1234AdminAdminAdminadminrootrootRootRootRootrootrootRootrootadmin</table>

More info here: https://www.commentcamarche.net/maison/box-connexion-internet/643-192-168-0-1-192-168-1-1-192-168-0-254-comment-acceder-a-une-box-internet/

andre.h · Answer

http://192.168.1.1 is not a website but the router itself that needs to be configured, and by default, the username is admin and the password is admin.

PhP · Answer

Good evening,

Indeed, normally to connect as an administrator on this model

Username: (leave it blank)
Password: admin (make sure it's in lowercase!)

Otherwise, try this (but I don’t really believe it)

Username: admin
Password: admin (make sure it's in lowercase!)

Is your modem new, or is it a second-hand model?

If it's a second-hand model, then the previous user may have changed the access codes

If that's the case, at the back of the modem, there is a small Reset button: press it with the tip of a paperclip or a pen
for at least 15 seconds. The LEDs should blink at some point. Then turn off your modem and turn it back on.
It should completely reset to its factory default settings.

Then you should be able to access it at 192.168.1.1

@+

--
PhP
There are 10 types of people in the world: those who understand binary and the others...

arman le maire · Answer

Good evening

if you can't get through, try forcing the IP address. By going to
start + control panel / network connections + tcp/ip + properties +
check use the following IP address + 192.168.1.2.
secondary IP address: 192.168.1.1.
it should work.
password: c.admin.
good luck

Rachid · Answer

Hi :)

If your modem is already being used by someone else, then the username and password have been changed.

In that case, you just need to reset the router using the reset button at the back with a small pointed object.

Good luck!

david · Answer

Hi!!! In the bar where you can enter sites, type 192.168.1.1... After that, a window will open, in which type: Username -> admin/password -> 1234. There you should be...

bernard2 · Answer

For my part, I solved the problem by getting rid of the Linksys and getting a Netgear. The big issue with the Linksys is the power button; in case of a brief power outage, it doesn't turn back on by itself, and moreover, it freezes.

websider · Answer

Hello,

It's normal that it doesn't work because 192.168.1.1 is the address used only to configure Liveboxes (routers) and not yours.
Check your router's booklet for the access and password.

Good luck!

LBT76240 · Answer

It's normal that you're not able to do it because this place is for modifying my Livebox, so it's normal that the password doesn't work.

roro83 · Answer

you installed your modem and you have a "NEUF" icon on your desktop -Right-click on it and you'll find everything Hello

Dune04 · Answer

I have a Hitachi modem. To access my configuration page, I had to type "http://alice:alice@192.168.1.1/"

gonzy · Answer

Hi,

in your browser preferences, change your homepage and type directly 192.168.1.1
exit the preferences, and restart your browser
the configuration page should theoretically display. follow the instructions afterwards...

there you go, hoping it works ;-)

best regards

Gonzy

nad0u13 · Answer

The address is not always 192.168 ...  Go to Start -) Run -) cmd -) ipconfig/all -) press enter, take the one where it says server ... And type it in the internet browser.

192.168.1.1 connection issue

13 réponses

Texture issues in enshrouded

Bank account charged but aliexpress order not found.

Can there be fake players in scrabble go?

My samsung galaxy tab 3 won't turn on and won't charge.

Philips sbc headphones batteries

Dhgate, reliable site or not?

Universal remote control temium remo3/1 code

Free plug sync problem

Very very slow internet...

Taskbar does not hide anymore